Page 1 of 1

Startup WISP - Help with initial config of RB750

Posted: Wed Sep 16, 2009 7:48 am
by Nanflexal
Hello guys, I'm new to mikrotic product so i need help about configuring RB750, I need help to combine 6 ISP & 3 dual wan dlink router and RB750.

Dual wan Link Router.
internet(1,2)----> dlink1
internet(3,4)----> dlink2 ------>RB750 ------>APs
internet(5,6)----> dlink3

I can't find affordable router that can bond 6 or 8 ISP so i will start Dlink lb-604 as starting WISP.

Image


I plan to start 6 Mbps for culasi, calayuan, calintaan and bon-ot but as starting we have 15-20 sure users in this area.

Thank you very much
Alex

Re: Startup WISP - Help with initial config of RB750

Posted: Wed Sep 16, 2009 9:23 am
by angboontiong
You may look for the Big 5 Load balancer...

Re: Startup WISP - Help with initial config of RB750

Posted: Wed Sep 16, 2009 12:49 pm
by Nanflexal
You may look for the Big 5 Load balancer...
thank your input angboontiong, can you give me the exact model or link to that product?

Thanks
Alex

Re: Startup WISP - Help with initial config of RB750

Posted: Wed Sep 16, 2009 3:55 pm
by InoX
Price: US $2,145.00
Condition: Refurbished
good luck

Re: Startup WISP - Help with initial config of RB750

Posted: Thu Sep 17, 2009 2:45 am
by Nanflexal
Price: US $2,145.00
Condition: Refurbished
good luck
I can't affor to buy it this time. maybe later once my network become operational.


anyway, I will try to Bond 4 or 6 ISP using Ubuntu. Thanks

Re: Startup WISP - Help with initial config of RB750

Posted: Thu Sep 17, 2009 10:34 am
by normis
RouterOS can't combine links to achieve 4x the original speed, but it can do load balancing and policy routing. RouterOS supports bonding only if at both ends of the link there are mikrotik routers

Re: Startup WISP - Help with initial config of RB750

Posted: Thu Sep 17, 2009 4:42 pm
by mobilexpi
normis:
I want to know if is it possible to install Mikrotik on a Virtual Private Server (in a datacenter) and then bond both links between my RB450G and the mikrotik virtualized?

Do you understand my idea?
Thanks

Re: Startup WISP - Help with initial config of RB750

Posted: Thu Sep 17, 2009 5:48 pm
by angboontiong
or may u look for planet load balancer...

http://www.planet.com.tw

Re: Startup WISP - Help with initial config of RB750

Posted: Fri Sep 18, 2009 4:47 am
by Nanflexal
guys, do you have a guide on how to configure RB750?

My setup would be:
Dual wan Link Router.
internet(1,2)----> dlink1
internet(3,4)----> dlink2 ------>RB750 ------>APs
internet(5,6)----> dlink3

Thanks in advance.

@ Alex

Re: Startup WISP - Help with initial config of RB750

Posted: Fri Sep 18, 2009 9:08 am
by Nanflexal
Guys, i have another question, i was thinking of my 6 ISP with 1 Mbps speed in matnog, so i would like to know if my 6 ISP can reach in Bon-ot big?

Thanks in advance for your reply.

@ Alex

Re: Startup WISP - Help with initial config of RB750

Posted: Sat Sep 19, 2009 3:13 pm
by Nanflexal
after some consideration and presentation of technicals staff from reseller of qno product in the philippines, I will use their Load Balancer appliances with 4 WAN port, This load balancer has a fantastic features, you can make fail over or load balancing or use your 3 ISP at the same time.

some feature:

multi subnet
virtual protocol
Protocol Binding
WAN Transparent Bridge Mode

take note: this load balancer does not bond ISP / dsl connection.

My backbone is 4 ISP with 1 Mbps each. once my network is complete, i have 10 customer in culasi and 10 customer in calintaan and culayuan and 10 in bon-ot big. how many user can share this connection?

Re: Startup WISP - Help with initial config of RB750

Posted: Thu Sep 24, 2009 7:43 pm
by Nanflexal
anyone use RB750 to manage port range and is this manage switch?