hello guys, Ive some problem with 2 engenius EMP-8603 radios, ive 2 of them and when I inserted into RB433 it doesnt detect 2 radios only the one.

I tried putting the external powersource of 9 volts to both and nothing, also I upgraded from 3.30 to 4.5 and nothing

when I go to the system - resources
in the PCI tab I see 2 pci

Datasheet of minipci
http://www.engeniustech.com/datacom/pro ... =33&ID=250Click here to download

this is a screenshoot of routeros



please if you can say me whats wrong

thanks

I forgot to say, I tested each one separately and works, but doesnt detect when i plug at the same time

thanks

please guys give me a hand....

Upgrade to v4.6 and upgrade your bootloader, maybe it helps.

I have one running equal like yours and it works like a charm.

I have them working with external power supply at 24v. I have soldered the power cables to the poe connector.

Kindly regards

Upgrade to v4.6 and upgrade your bootloader, maybe it helps.

I have one running equal like yours and it works like a charm.

I have them working with external power supply at 24v. I have soldered the power cables to the poe connector.

Kindly regards

it didnt work, upgraded to 4.6 resetted to factory default, I also upgrade the bootloader before nothing, its weird, so guys anyone who had this problem please help me

thanks

Hi, can you test this cards in some mipsle or ppc system?

I'll try to get a rb333 and test with it, so what problem do you think it have


because Ive a RB333 with 2 engenius EMP-8602+S and 1 ubiquiti XR2 and works great over 2 years

Else try swap mPCI sockets maybe some of this not soldered properly.

Else try swap mPCI sockets maybe some of this not soldered properly.

I´ll try it. I just sent to mikrotik my support.rif and screenshoot

I found the problem, and guys you wont beleive me,,, I discovered that both miniPCI has the same EEEPROM chip, means it has the same mac address, etc

so I soldered another eeeprom from R52H and put it, and worked perfectly, now im trying to modify the eeeprom to see if I can change the mac

Seems production calibration problem. Be carefully with eeprom modification it contain very sensitive information.