Community discussions

MikroTik App
 
zviadi
just joined
Topic Author
Posts: 1
Joined: Tue Mar 23, 2010 2:51 pm

Configuring antenna-mode on R52Hn

Tue Mar 23, 2010 2:57 pm

Hello all,

I have router board RB600A and mini PCI card R52Hn. I want configure antenna-mode and set it to ant-b value.
When I trying set antenna-mode=ant-b (telnet using) after giving command, RouterOS ask me a Numbers:.
What does mean Numbers parameter?

thank you!
 
pikpik
Frequent Visitor
Frequent Visitor
Posts: 80
Joined: Wed Jan 20, 2010 11:25 am

Re: Configuring antenna-mode on R52Hn

Wed Mar 24, 2010 3:40 pm

on N use chains
 
User avatar
mishaM
Frequent Visitor
Frequent Visitor
Posts: 84
Joined: Sun Oct 25, 2009 1:48 pm
Location: Georgia

Re: Configuring antenna-mode on R52Hn

Thu Mar 25, 2010 8:11 am

see that pic.
------------------------------------
You do not have the required permissions to view the files attached to this post.
 
aaa
Member
Member
Posts: 458
Joined: Mon Apr 11, 2005 11:54 am
Location: Latvia, Baltezers

Re: Configuring antenna-mode on R52Hn

Thu Mar 25, 2010 8:39 am

He ask number over there device name. Antenna mode settings is not active for this wireless card. Each chain have only one antenna output. Use ht-rx/tx chain= to configure antenna-mode.
 
dingsingo
Member Candidate
Member Candidate
Posts: 116
Joined: Sun Jul 24, 2005 9:47 pm
Location: Germany

Re: Configuring antenna-mode on R52Hn

Thu Mar 25, 2010 9:20 am

He ask number over there device name. Antenna mode settings is not active for this wireless card. Each chain have only one antenna output. Use ht-rx/tx chain= to configure antenna-mode.

Hi,

it not so simple. When we use V4.5 or V4.6 with 1 Antenne on J4 and setting HT-rx / HT-tx = 0 ist dosn't work !!!

When we set HT-rx / HT-tx = 0 and 1 it works fine. Where is the Problem ????


dingsingo
 
aaa
Member
Member
Posts: 458
Joined: Mon Apr 11, 2005 11:54 am
Location: Latvia, Baltezers

Re: Configuring antenna-mode on R52Hn

Thu Mar 25, 2010 1:13 pm

What band settings you use? I just test it on 411 with 4.6 RouterOS in indoor setup each chain conform chain settings. When you set RX/TX =0 J4 working in both directions. When you set RX/TX = 1 both directions working over J5.
 
dingsingo
Member Candidate
Member Candidate
Posts: 116
Joined: Sun Jul 24, 2005 9:47 pm
Location: Germany

Re: Configuring antenna-mode on R52Hn

Thu Mar 25, 2010 2:22 pm

What band settings you use? I just test it on 411 with 4.6 RouterOS in indoor setup each chain conform chain settings. When you set RX/TX =0 J4 working in both directions. When you set RX/TX = 1 both directions working over J5.

Set is only 802.11a with a vertical and a horizontal Antenna. Other Side ist was a R5H only vertikal Antenna.

set only 0 or 1 not work. RX 0 & 1 , TX 0 or 1 not work. Setting RX 0 & 1 - TX 0 & 1 works by signal 30 dB.


dingsingo

Who is online

Users browsing this forum: genesispro, ondrejstepanek and 25 guests