Community discussions

MUM Europe 2020
 
bigguns
Member Candidate
Member Candidate
Topic Author
Posts: 238
Joined: Thu Apr 01, 2010 9:03 am

RB800, with two Wifi cards (R52N) optimal setup (indoor)?

Thu May 13, 2010 9:45 am

Hi there,
I've got 2x R52N's card in my router and 4x 2.4-5.8 GHz 2dBi gain Omnidirectional Swivel Antenna.

I'm looking to set up one card for Pure 2.4ghz G-mode and the other 5ghz N-mode.

Ideally it would great to setup the cards as MIMO, to get the best range/throughput.

Has anyone got any tips on the right settings to be used with the cards from experience that they are will to share?

Thanks
 
bigguns
Member Candidate
Member Candidate
Topic Author
Posts: 238
Joined: Thu Apr 01, 2010 9:03 am

Re: RB800, with two Wifi cards (R52N) optimal setup (indoor)

Fri May 14, 2010 9:55 am

I will post a picture of my setup at the moment for both cards -but I'm suprised that no one has made any suggestions as to the best settings to use.
 
0ldman
Forum Guru
Forum Guru
Posts: 1446
Joined: Thu Jul 27, 2006 5:01 am

Re: RB800, with two Wifi cards (R52N) optimal setup (indoor)

Fri May 14, 2010 6:07 pm

There really isn't much to it.

There is a long thread stickied just above that has quite a bit of info for 802.11n configuration and testing.

Who is online

Users browsing this forum: No registered users and 31 guests