Community discussions

MikroTik App
 
wilburt
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 84
Joined: Tue Aug 24, 2010 3:07 am

Newbie Wifi tx/rx speeds via RB411AH with R52

Tue Dec 07, 2010 3:06 pm

Hi MT Wireless experts!!!

I have a simple WLAN setup with a RB800 as the primary router for the HS. From the RB800 I get 4+Mbps download speed, but at the wireless client I get a max of 80Kbps

Is there something I can change on the wireless card to improve the wireless client download speeds? I only have one R52 card in the RB411AH and one 2.4Ghz Omni antenna.

This is the configuration I have on my RB411AH with the R52 wlan card

0 R name="wlan1" mtu=1500 mac-address=xxxx arp=enabled disable-running-check=no
interface-type=Atheros AR5413 radio-name="xxxx" mode=ap-bridge ssid="xxxx" area=""
frequency-mode=manual-txpower country=no_country_set antenna-gain=0 frequency=2417 band=2.4ghz-b/g
scan-list=default rate-set=default supported-rates-b=1Mbps,2Mbps,5.5Mbps,11Mbps
supported-rates-a/g=6Mbps,9Mbps,12Mbps,18Mbps,24Mbps,36Mbps,48Mbps,54Mbps basic-rates-b=1Mbps
basic-rates-a/g=6Mbps max-station-count=2007 ack-timeout=dynamic tx-power-mode=default
noise-floor-threshold=default periodic-calibration=default periodic-calibration-interval=60
burst-time=disabled dfs-mode=none antenna-mode=ant-a wds-mode=disabled wds-default-bridge=none
wds-default-cost=100 wds-cost-range=50-150 wds-ignore-ssid=no update-stats-interval=disabled
default-authentication=yes default-forwarding=yes default-ap-tx-limit=0 default-client-tx-limit=0
proprietary-extensions=post-2.9.25 wmm-support=disabled hide-ssid=no security-profile=default
disconnect-timeout=3s on-fail-retry-time=100ms preamble-mode=both compression=no allow-sharedkey=no
station-bridge-clone-mac=00:00:00:00:00:00 hw-retries=4 frame-lifetime=0 adaptive-noise-immunity=none
hw-fragmentation-threshold=disabled hw-protection-mode=none hw-protection-threshold=0 frequency-offset=0


Thanks in advanced.
 
wilburt
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 84
Joined: Tue Aug 24, 2010 3:07 am

Re: Newbie Wifi tx/rx speeds via RB411AH with R52

Wed Jan 19, 2011 9:45 am

just in case anyone comes across this post, i did some test and for my case changing the wireless frequency helped wit hthe speed and stability of the wifi connection.

hope this helps anyone else.

Who is online

Users browsing this forum: LSan83 and 27 guests