RB711 Cheaper then RB411+W-card
but which one is best and reliable?

so far no problems with rb 711....

711 has just one antena conector, 411+card can have 2outputs for bi-polar antena.

so far no problems with rb 711....

how many rb711 you used in network?
how many days before you are installed?
you suggest us rb711? its batter then rb411? or both are equal?

thanks for reply

almost 30 rb 711 r working fine.

411 with card costs a little more nd u rarely use bipolar antenna for ptp link

Almost 250 RB711 on my network working fine.
I had some failures but all at the first boot.
RMA and got new ones.

i used on my network more then 350 rb411, rb711
almost near 200 rb411 working fine in network, no complain, very reliable
almost 150 rb711 working fine in network, very good performance same like rb411, but in rb711 have some hardware issue, rb711 is not reliable like rb411 is working fine but i feel that, that is my personal experience

what you think? they are equal ?

Do we have any update on this?

Are they equal?

RB711 Has 32 MB Memory and 400MHZ Processor. Single Chain 802.11A/N Antenna Connector.

RB411 has 32MB Memory and 300MHZ Processor. Can use any card..

What do you need it for? 711's are great for what they are, and super affordable!

If you need dual pol. cpe device consider RB/SXT

I'm talking about reliability.

I'm interested for single 5GHz point to point link.

RB711 Has 64 MB Memory and 400MHZ Processor. Single Chain 802.11A/N Antenna Connector.

RB411 has 32MB Memory and 300MHZ Processor. Can use any card..

What do you need it for? 711's are great for what they are, and super affordable!

If you need dual pol. cpe device consider RB/SXT

RB711 only 32MB mem. not 64..
RB711A has 64MB mem.

RB711 only 32MB mem. not 64..
RB711A has 64MB mem.

FIXED. looked up the wrong link on routerboard.com on accident.

I'm talking about reliability.

I'm interested for single 5GHz point to point link.

i am having the same question.... this forum does not seem to be giving the answers in the right direction.

I'm talking about reliability.

I'm interested for single 5GHz point to point link.

i am having the same question.... this forum does not seem to be giving the answers in the right direction.

What do you mean? What is your question?

I've got a 711 running a 14 mile link, runs fine, no problems at all.

XR5 + 12dBi omni at the AP 333 ROS v3.30, 711 and 26dBi client running 4.17.

711 appears to out perform the 411 from all testing I've done.

certainly boots a heck of a lot faster ;P

hey guys... thanks... you boost my confidence