Community discussions

MikroTik App
 
vahid023
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 63
Joined: Mon Sep 13, 2010 1:14 pm

low tx CCQ-High rx CCQ

Wed May 25, 2011 1:12 am

hi
i have rb433+xr2+it elite sectore in b/g mode and ap-bridge and all other things is default

but when any device connected to it the tx ccq = about 12 but rx ccq= 100

whats the reason.the link quality is very bad and maximum download that we tested is 250 kb/s

a few days a go i test r52hn and have this problem
 
WirelessRudy
Forum Guru
Forum Guru
Posts: 3094
Joined: Tue Aug 08, 2006 5:54 pm
Location: Spain

Re: low tx CCQ-High rx CCQ

Wed May 25, 2011 2:16 am

What are the signal strenghts?

Export and print wireless interface settings of both AP and client so forum can take a look.
Show your appreciation of this post by giving me Karma! Thanks.

Rudy R. Puister

WISP operator based on MT routerboard & ROS.
 
vahid023
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 63
Joined: Mon Sep 13, 2010 1:14 pm

Re: low tx CCQ-High rx CCQ

Wed May 25, 2011 8:59 am

signal is very good between -40 to -55 at tx , rx
rx ccq is very good tx ccq is very bad
 
WirelessRudy
Forum Guru
Forum Guru
Posts: 3094
Joined: Tue Aug 08, 2006 5:54 pm
Location: Spain

Re: low tx CCQ-High rx CCQ

Wed May 25, 2011 4:15 pm

signal is very good between -40 to -55 at tx , rx
rx ccq is very good tx ccq is very bad
If tx CCQ is bad (when date is transported. If not CCQ's drop low anyway) it could be the ´other´ end has lots of interference of other signals.
Run a scan on both ends to see if you have other strong signals in the same or nearby band.
Show your appreciation of this post by giving me Karma! Thanks.

Rudy R. Puister

WISP operator based on MT routerboard & ROS.

Who is online

Users browsing this forum: No registered users and 44 guests