Community discussions

 
User avatar
dunga
Member Candidate
Member Candidate
Topic Author
Posts: 254
Joined: Fri Jan 23, 2009 9:51 am
Location: Nigeria

best advice for this wireless link (point to point link)

Mon Oct 03, 2011 5:15 pm

hello all,
I just established a point to point link with 2 mikrotik radio (rb411) both, one as bridge and the other one as wds.

What i get as my signal strenght is -76/78, in 5ghz. When i ping, i get response of 1ms. Is there a way i can do any thing to improve the speed? What benefit do i have if i configure it as nstreme dual.

In the two radio is i run bandwidth test the response time increased to 563ms while with d test it replies 1ms.

Please your advice and suggestions are needed urgently here as i need this link to support over 8mbs of bandwdith in full duplex.

see the pictures below
bandwdith test and ping test.JPG
ping tes without bandwdith test.JPG
base2.JPG
Please i have just 2days to conclude on this project.
You do not have the required permissions to view the files attached to this post.
 
User avatar
m4rk0
Member Candidate
Member Candidate
Posts: 195
Joined: Sat Feb 16, 2008 8:30 pm
Location: BA

Re: best advice for this wireless link (point to point link)

Tue Oct 04, 2011 1:09 am

Hello,

At first change "Country" to e.g. Germany, than Apply.
Do "Freq. usage"... Check on You antenna for what frequency range is made, 5100 - 5800? 5400-5800?
Update software to at least v4.17...
Set both RBs wlan1 to "Mode: bridge", try to turn of WDS... Bridge ether1 & wlan1 on both RBs...

How long is your wireless link? What are your antenna specs?
http://www.mreza-wisp.ba/
Please, give Karma if I fix your problem
Certified MTCNA
 
User avatar
dunga
Member Candidate
Member Candidate
Topic Author
Posts: 254
Joined: Fri Jan 23, 2009 9:51 am
Location: Nigeria

Re: best advice for this wireless link (point to point link)

Wed Oct 05, 2011 1:00 am

Hello,

At first change "Country" to e.g. Germany, than Apply.
Did change the country yet no changes

Do "Freq. usage"... Check on You antenna for what frequency range is made, 5100 - 5800? 5400-5800?
Frequecy = 5100 - 5800

Update software to at least v4.17...
Software updated to 5.6

Set both RBs wlan1 to "Mode: bridge", try to turn of WDS... Bridge ether1 & wlan1 on both RBs...
The rb are in bridged mode, with wds turned on.

How long is your wireless link?
about 5km distance

What are your antenna specs
15dbi
?
 
christyjame
just joined
Posts: 15
Joined: Fri Feb 10, 2012 5:19 pm
Location: Erode,Tamilnadu,India

Re: best advice for this wireless link (point to point link)

Sun Feb 12, 2012 4:46 pm

Hi Seniors . . .

Thanks for this Post.
Christyjame

Who is online

Users browsing this forum: No registered users and 26 guests