Using 433GL, I test connect to CPE(AP). 192.168.1.12 PC can receive ping reply from all(192.168.1.1/2/11)
But 192.168.1.11 PC is only receive from 192.168.1.1. cannot receive from 433GL(192.168.1.2).

433GL is set as Station mode. ARP= Proxy ARP.
There is no Firewall setting.

Let me know what did I wrong?

Why don't u try WDS mode...

have you configured Proxy-ARP on Common AP too...

WDS mode is dependent on the AP as well.

Station Pseudobridge may do the trick here.

What are you trying to do? Bridge a network? Just get on the Internet?

-------
nice and good suggestion


Hasbullah.com
-------

WDS mode is dependent on the AP as well.

Station Pseudobridge may do the trick here.

What are you trying to do? Bridge a network? Just get on the Internet?

can post you detail configuration?

The standard 802.11 can't use to bridge with 802.3 ethernet, There's better use WDS Transparent bridge in replacement of psudo-bridge

http://wiki.mikrotik.com/wiki/Transpare ... o_Networks

you can use Dynamic Mesh and AP Bridge when you want to make bridge between more than 2 devices.

good luck