Community discussions

MikroTik App
 
Roy
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 75
Joined: Wed Jan 11, 2012 9:56 am

Continuous Tx Spectrum Test for Certificaiton

Fri Jun 08, 2012 10:07 am

https://www.youtube.com/watch?v=7GCJYAS ... ata_player

I'm testing Continuous Tx test for Certification.

For spectrum test, I set mode as "alignment only"
Please refer to attached youtube video.

Spectrum result is not clear pattern.
I used RB433GL + WLM200N5-23(compex)/DNMA-H5(UNEX)
let me know how setup for clear spectrum pattern.
 
uldis
MikroTik Support
MikroTik Support
Posts: 3439
Joined: Mon May 31, 2004 2:55 pm

Re: Continuous Tx Spectrum Test for Certificaiton

Fri Jun 08, 2012 11:56 am

could you tell us what test you need - receive (so the wireless card is just listening and not transmitting) or transmit (so the wireless is constantly transmitting frames)?
 
Roy
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 75
Joined: Wed Jan 11, 2012 9:56 am

Re: Continuous Tx Spectrum Test for Certificaiton

Fri Jun 08, 2012 1:25 pm

I want to test Continuous Tx. Wanted result is clear pattern of Spectrum analyser.

Other manufacturer provide me "RF test firmare" and ART program for this test.
 
uldis
MikroTik Support
MikroTik Support
Posts: 3439
Joined: Mon May 31, 2004 2:55 pm

Re: Continuous Tx Spectrum Test for Certificaiton

Fri Jun 08, 2012 1:48 pm

please contact support@mikrotik.com about this question
 
Montana
Member Candidate
Member Candidate
Posts: 196
Joined: Tue Jun 29, 2004 6:24 am
Location: Moscow Idaho

Re: Continuous Tx Spectrum Test for Certificaiton

Mon Jun 11, 2012 3:44 pm

Is this possible with mikrotik? I have needed something simple like this in the past. What I have done was to set up two systems with 2 computers running iperf and a spectrum analyzer. It was a pain due to the number of parts. A simpler setup would be great.

Who is online

Users browsing this forum: No registered users and 54 guests