Community discussions

MUM Europe 2020
 
1929
just joined
Topic Author
Posts: 8
Joined: Mon Feb 13, 2012 3:57 am

RB751U-2HnD - which to better position

Sat Jun 16, 2012 7:48 am

How is the lobe of irradiation of the RB751 2hnd? Is It omnidirectional? And the AP in the vertical position is it going to transmit omnidirectional or by sector? Or in the indoor use is not going to do difference in the AP position?
 
mgutz2
Frequent Visitor
Frequent Visitor
Posts: 97
Joined: Wed Jul 07, 2010 8:55 pm
Location: Nicaragua

Re: RB751U-2HnD - which to better position

Sun Jun 17, 2012 5:40 am

no diference on interiors location and short link. only if you want to do a point to point conection.
 
1929
just joined
Topic Author
Posts: 8
Joined: Mon Feb 13, 2012 3:57 am

Re: RB751U-2HnD - which to better position

Sun Jun 17, 2012 7:45 am

no diference on interiors location and short link. only if you want to do a point to point conection.
Ok, but as is the lobe of irradiation? If the AP is in the vertical position is it bidirectional and itself is in the horizontal position is it omnidirectional?
I am going to use it in outdoor for more or less 100 meters.
 
rviteri
Frequent Visitor
Frequent Visitor
Posts: 84
Joined: Fri Nov 18, 2011 5:53 pm

Re: RB751U-2HnD - which to better position

Sun Jun 17, 2012 7:36 pm

How is the lobe of irradiation of the RB751 2hnd? Is It omnidirectional? And the AP in the vertical position is it going to transmit omnidirectional or by sector? Or in the indoor use is not going to do difference in the AP position?
I found this router to have a poor internal antenna - CCQ is very low, the specs say you need an MMCX connector but I've had a really hard time finding a connector that fits.
 
1929
just joined
Topic Author
Posts: 8
Joined: Mon Feb 13, 2012 3:57 am

Re: RB751U-2HnD - which to better position

Sun Jun 17, 2012 8:06 pm

How is the lobe of irradiation of the RB751 2hnd? Is It omnidirectional? And the AP in the vertical position is it going to transmit omnidirectional or by sector? Or in the indoor use is not going to do difference in the AP position?
I found this router to have a poor internal antenna - CCQ is very low, the specs say you need an MMCX connector but I've had a really hard time finding a connector that fits.
Thank you very much by the feedback
 
mgutz2
Frequent Visitor
Frequent Visitor
Posts: 97
Joined: Wed Jul 07, 2010 8:55 pm
Location: Nicaragua

Re: RB751U-2HnD - which to better position

Mon Jun 18, 2012 12:55 am

Efectectively for 100mts is not enouch anttena, i use this http://www.flyteccomputers.com/details. ... x%202,4GHz this have a mmxc conector for rb751, select the antenna b on mikrotik and work very good.

Who is online

Users browsing this forum: bobobobo, flxn, Larsa, llubik and 38 guests