Community discussions

MUM Europe 2020
 
dison4linux
just joined
Topic Author
Posts: 18
Joined: Fri Apr 13, 2012 4:26 pm

RB751U-2HnD VLANs for separate SSIDs

Wed Sep 05, 2012 6:29 pm

I have an RB751U-2HnD setup with multiple SSIDs that lands the user in multiple VLANs depending upon which SSID they connect to. The way that I have found to implement this is to create a bridge between each SSID and each VLAN. I have read that this will be limiting to the throughput because of the load on the CPU however I did not know that it would be as bad as it is. I can only get about 8Mbps of traffic through the device as the CPU reaches 100%. Is this to be expected? If so is there any other way to setup multiple SSIDs and keep the traffic of each in separate networks?
 
User avatar
cbrown
Trainer
Trainer
Posts: 1840
Joined: Thu Oct 14, 2010 8:57 pm
Contact:

Re: RB751U-2HnD VLANs for separate SSIDs

Wed Sep 05, 2012 6:51 pm

This is how we would setup the same kind of network. How are you doing your speed test?
C.Brown

cbrown[at]ravenrocknetworks.com
MTCNA - MTCRE - MTCWE - MTCTCE
MTCSE - TRAINER-0179
 
dison4linux
just joined
Topic Author
Posts: 18
Joined: Fri Apr 13, 2012 4:26 pm

Re: RB751U-2HnD VLANs for separate SSIDs

Thu Sep 06, 2012 7:21 pm

I'm just looking at the interface statistics while copying a file from a laptop to a server using the bridged SSID-VLAN.

Who is online

Users browsing this forum: Majestic-12 [Bot] and 22 guests