RB532 + RB564 + Six SR2 ????

hulud · Tue Feb 14, 2006 6:10 pm

RB532 + RB 564 + six sr2
Will it work at maximum power ?
Can someone say it for sure ?

cmit · Tue Feb 14, 2006 6:48 pm

Six SR2's is absolutely above the maximum electrical power the RB500 can provide...

Search the forum for relevant threads - this has been discussed here and on http://forum.routerboard.com, too.

Best regards,
Christian Meis

hulud · Tue Feb 14, 2006 6:59 pm

48V power over ethernet won't help ?

wildbill442 · Tue Feb 14, 2006 7:05 pm

Nope, RB500 series will support a recommended maximum of two SR2/5 cards. It's the limitation of the miniPCI slots.

cibernet · Tue Feb 14, 2006 10:49 pm

Nope, RB500 series will support a recommended maximum of two SR2/5 cards. It's the limitation of the miniPCI slots.

That´s right.. 2 cards MAXIMUN, using 48V and 30W powe supply....

Regards

bholler · Sat Feb 18, 2006 4:31 pm

Please ciber, have u tried 2 SR2 on a RB500 before and did it ork perfectly.becuse this the main problem i have with a network design for a client of mine.

djape · Sat Feb 18, 2006 5:23 pm

4 cm9 cards work without problem!
2 SR2 cards are maximum for RB532!
I never tried two SR2 and two CM9 in RB532 so I can't give you any advice about that configuration.

Cheers...

bholler · Sat Feb 18, 2006 5:38 pm

hello all,

i have a new client that already is already WISP using 2.4 GHZ platform with YDI radios with this he has ydi CPE radios in stock.... but he want my me to build a back backhaul link for him on 5ghz and later distribute again with 2.4 ghz. so i want to use rb530/2x sr2. with 2x 180 degree sectors or 4x 90 degres sectors with splitters.

my main concern is: how effective are 2 of SR2 cards on RB532 ?
how effective will it be to split one card into 2x 90 degress sectors
will 2x SR5 cards be effective too

cibernet · Sat Feb 18, 2006 6:45 pm

Please ciber, have u tried 2 SR2 on a RB500 before and did it ork perfectly.becuse this the main problem i have with a network design for a client of mine.

I have tried 1 SR2 + 1SR5 on RB532, and its working fine

Regards

kiwi-chris · Sun Feb 19, 2006 10:52 am

I have a few set up
532 + SR5 and CM9
532 + SR2 and SR2 (on low output) and CM9
532 + SR5 and SR2
512 + SR2 and SR2
512 + SR2 and prism 200mw

All seam to work ok, but the 5.8 links are taking a bit to get sorted 100%

Back when the SR2 first came out I tried 4 and a CM9 and killed it. I have learnt from my mistake.

Like everyone says 2 Max

bholler · Sun Feb 19, 2006 4:20 pm

hello sirs,

thanks for the responses, please what if i try to use 2x sr2 and 1 x cm9 to achieve 3 sectors at 120 degrees

has anyone tried it that way ?

cibernet · Sun Feb 19, 2006 10:58 pm

hello sirs,

thanks for the responses, please what if i try to use 2x sr2 and 1 x cm9 to achieve 3 sectors at 120 degrees

has anyone tried it that way ?

I don´t recommend you that... only if you power down one of the SR....

Regards

RB532 + RB564 + Six SR2 ????

RB532 + RB564 + Six SR2 ????

Who is online