Community discussions

MikroTik App
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 81
Joined: Sat Jan 12, 2008 1:02 am
Location: Roma

VLAN on three locations with wireless connection.

Wed Apr 17, 2013 8:39 pm

Hi all,
I have a small problem but it is very important for me to solve.

I have trhee location connected with ptp mikorikt

Location1 <ap --ptp --station> Location2 <ap --ptp----station> Location.

and for each routerboard set bridge

bridge1 - wlan1
bridge1 - ether1

allo working perfectaly in bridge mode.

I would like to use vlan for each localtion , i have added interface vlan on port ether1 for each location.
and add interface vlan in bridge1:
bridge1 - wlan1
bridge1 - ether1
bridge1 - vlan1

Location1 <vlan1/ap --ptp --station> Location2 <ap --ptp----station/vlan1> Location3

For each vlan1 i have assigned ip address and ping it's ok.

i would like in location3 all traffic tagged for vlan1 and then in routerbaord station i changed bridge
bridge1 - ether1
bridge1- vlan1
and in wlan1 assigne ip and out of bridge.

from vlan1 on location1 ping to vlan1 on locataion3 ..packet lost only reinsert wlan1 in bridge1

what's wrong?
just joined
Posts: 23
Joined: Sun Apr 01, 2012 4:23 am

Re: VLAN on three locations with wireless connection.

Thu Apr 18, 2013 10:22 am

I believe we need more information in order to help with this issue. What interfaces are you assigning the I addresses? Are you routing between the ptp links or just creating one huge bridge? Remember vlans will only traverse through layer 2.

Who is online

Users browsing this forum: No registered users and 20 guests