Community discussions

MikroTik App
 
User avatar
mahnet
Long time Member
Long time Member
Topic Author
Posts: 654
Joined: Tue Jul 07, 2009 9:11 pm

BANDWIDTH TEST VS ACTUAL THROUGHPUT

Tue May 21, 2013 9:23 pm

I do not understand why but I have experienced this a number of times.

1. 2 SXT's point to point - configured bridge and station bridge using nv2 routerOS 5.24
2. bandwidth test shows - 100mbps +
3. real-time internet bandwidth shows increased latency at 6 mbps+
4. Why?
5. Noise floor -117 dbm, tx/rx connectivity - 63/67 dbm
 
User avatar
Belyivulk
Member Candidate
Member Candidate
Posts: 286
Joined: Mon Mar 06, 2006 10:53 pm
Location: Whangarei, New Zealand
Contact:

Re: BANDWIDTH TEST VS ACTUAL THROUGHPUT

Wed May 22, 2013 9:16 am

As always, what is your configuration?
 
angboontiong
Forum Guru
Forum Guru
Posts: 1136
Joined: Fri Jan 16, 2009 9:59 am

Re: BANDWIDTH TEST VS ACTUAL THROUGHPUT

Wed May 22, 2013 9:49 am

I do not understand why but I have experienced this a number of times.

1. 2 SXT's point to point - configured bridge and station bridge using nv2 routerOS 5.24
2. bandwidth test shows - 100mbps +
3. real-time internet bandwidth shows increased latency at 6 mbps+
4. Why?
5. Noise floor -117 dbm, tx/rx connectivity - 63/67 dbm
i believe you test it via the udp...
you should test it by using tcp then u will get the same result.

and, test both direction instead of one direction.
btw, can you print screen on the status???

Who is online

Users browsing this forum: Majestic-12 [Bot] and 27 guests