Page 1 of 1

BANDWIDTH TEST VS ACTUAL THROUGHPUT

Posted: Tue May 21, 2013 9:23 pm
by mahnet
I do not understand why but I have experienced this a number of times.

1. 2 SXT's point to point - configured bridge and station bridge using nv2 routerOS 5.24
2. bandwidth test shows - 100mbps +
3. real-time internet bandwidth shows increased latency at 6 mbps+
4. Why?
5. Noise floor -117 dbm, tx/rx connectivity - 63/67 dbm

Re: BANDWIDTH TEST VS ACTUAL THROUGHPUT

Posted: Wed May 22, 2013 9:16 am
by Belyivulk
As always, what is your configuration?

Re: BANDWIDTH TEST VS ACTUAL THROUGHPUT

Posted: Wed May 22, 2013 9:49 am
by angboontiong
I do not understand why but I have experienced this a number of times.

1. 2 SXT's point to point - configured bridge and station bridge using nv2 routerOS 5.24
2. bandwidth test shows - 100mbps +
3. real-time internet bandwidth shows increased latency at 6 mbps+
4. Why?
5. Noise floor -117 dbm, tx/rx connectivity - 63/67 dbm
i believe you test it via the udp...
you should test it by using tcp then u will get the same result.

and, test both direction instead of one direction.
btw, can you print screen on the status???