Community discussions

 
User avatar
laithmikrotik
Member
Member
Topic Author
Posts: 427
Joined: Wed Apr 13, 2011 3:18 pm

sextant with RB912UAG-5HPnD

Thu Jun 27, 2013 6:27 pm

hi every one ...i have sextant with rb 711....if i replace it with RB912UAG-5HPnD ..anyone tell me if this step is fine?

with thanks.......


Image + Image
I LIKE MIKROTIK
 
User avatar
honzam
Forum Guru
Forum Guru
Posts: 2294
Joined: Wed Feb 27, 2008 10:27 pm
Location: Czech Republic

Re: sextant with RB912UAG-5HPnD

Thu Jun 27, 2013 9:12 pm

Yes you can.
But rb912 have L4 and is expensive. Do you need L4? If not, and miniPCIex is not required then is enough rb911
LAN, FTTx, Wireless. ISP operator
 
User avatar
laithmikrotik
Member
Member
Topic Author
Posts: 427
Joined: Wed Apr 13, 2011 3:18 pm

Re: sextant with RB912UAG-5HPnD

Thu Jun 27, 2013 9:40 pm

Yes you can.
But rb912 have L4 and is expensive. Do you need L4? If not, and miniPCIex is not required then is enough rb911
good idea ...thank you very much.
I LIKE MIKROTIK
 
User avatar
WirelessInstruments
newbie
Posts: 48
Joined: Wed Mar 06, 2013 10:27 pm
Location: Wroclaw, Poland
Contact:

Re: sextant with RB912UAG-5HPnD

Thu Jun 27, 2013 11:20 pm

RB911G-5HPnD is mounted there in standard. Generally you can change boards inside until you don't break soldered pigtail and as long as the board dimensions are not bigger than RB911. In general SEXTANT isn't made for changing boards frequently, the plastic claps make them cheap, good looking, but not resistant for frequent mount and unmount.

If you are going to make own solution, then I recommend my antenna http://www.wireless-instruments.com/en/ ... -20hv.html. You can use it as a substitute to SEXTANT and you are able to install there everything (installation compartment is 25 x 25 x 5 cm).
http://www.wireless-instruments.com/

Antenna professionals, custom antennas for any application.

WiBOX antenna manufacturer.

Skype ID: wireless-instruments
 
Deac
newbie
Posts: 33
Joined: Tue Feb 12, 2013 7:21 am

Re: sextant with RB912UAG-5HPnD

Fri Jun 28, 2013 12:46 am

If you are going to make own solution, then I recommend my antenna http://www.wireless-instruments.com/en/ ... -20hv.html. You can use it as a substitute to SEXTANT and you are able to install there everything (installation compartment is 25 x 25 x 5 cm).
As a variant: http://www.rfelements.com/en/products/e ... ionbox-xl/
Works fine for me.
 
User avatar
laithmikrotik
Member
Member
Topic Author
Posts: 427
Joined: Wed Apr 13, 2011 3:18 pm

Re: sextant with RB912UAG-5HPnD

Fri Jun 28, 2013 11:59 am

is the plastic cover of the sextant is bad ????!!!!!...i think it is strong enough to open it ... :( :(
I LIKE MIKROTIK
 
kembiet
Member Candidate
Member Candidate
Posts: 134
Joined: Thu Sep 22, 2011 12:09 pm

Re: sextant with RB912UAG-5HPnD

Thu Aug 15, 2013 9:48 pm

Hi there!
I am may out of topic! but I wish to know if the «RB912UAG-5HPnD-OUT» size allow it to be used on the UBNT «Mid-Gain Airmax Sector»

thz
 
Ivoshiee
Member
Member
Posts: 471
Joined: Sat May 06, 2006 4:11 pm

Re: sextant with RB912UAG-5HPnD

Fri Aug 16, 2013 1:05 am

is the plastic cover of the sextant is bad ????!!!!!...i think it is strong enough to open it ... :( :(
It is strong enough.

Who is online

Users browsing this forum: No registered users and 27 guests