Page 1 of 1

RB912UAG-5HPnD-OUT not working!

Posted: Sun Sep 08, 2013 6:55 pm
by kometchtech
I bought the RB912UAG-5HPnD-OUT, ​​but it is a situation that does not work well.

In the form you are using PoE Injector the RB912UAG-5HPnD-OUT, you connect the AC power,
it is connected to a PoE Port of RB951G-2HnD, but the power LED RB912UAG-5HPnD-OUT does not light.

Is this a failure?

The power LED on the PoE Injector is a state that is lit.

Best regards

Re: RB912UAG-5HPnD-OUT not working!

Posted: Mon Sep 09, 2013 9:14 pm
by haik01
It should be connected to the Eth 1 (or LAN1). If nothing happens (no LED goes on etc...) return for a RMA to the supplier.

Re: RB912UAG-5HPnD-OUT not working!

Posted: Mon Sep 09, 2013 9:19 pm
by kometchtech
Hi there
Thanks for the information.

I try to connect to Eth1, but the situation did not improve.
So, I decided to RMA negotiating with dealers.

Best regards
It should be connected to the Eth 1 (or LAN1). If nothing happens (no LED goes on etc...) return for a RMA to the supplier.

Re: RB912UAG-5HPnD-OUT not working!

Posted: Tue Sep 10, 2013 1:10 pm
by normis
Did you connect the PoE correctly? See 1:58 on this video: https://www.youtube.com/watch?v=-KNo1B7K-YY#t=121

Re: RB912UAG-5HPnD-OUT not working!

Posted: Tue Sep 10, 2013 2:03 pm
by kometchtech
hi, normis

The description of how to connect, thank you.
As long as you see this, I was mistaken about the connection method.

However, you are in that you have to exchange correspondence as the RMA dealer.

So you no doubt next time.
I would like to thank the appropriate advice.

Best regards
Did you connect the PoE correctly? See 1:58 on this video: https://www.youtube.com/watch?v=-KNo1B7K-YY#t=121

Re: RB912UAG-5HPnD-OUT not working!

Posted: Wed Sep 11, 2013 12:47 am
by InoX
:lol: :lol: :lol:

Re: RB912UAG-5HPnD-OUT not working!

Posted: Wed Sep 11, 2013 1:05 am
by kometchtech
I was connected as shown in the image, but the power does not enter, it did not work.

Re: RB912UAG-5HPnD-OUT not working!

Posted: Wed Sep 11, 2013 6:58 am
by scampbell
That'll sure do it :lol:

Also be sure when testing that your Ethernet cable has all 8 wires connected (look at RJ45). Some inexpensive cables (shipped with cheap soho 10/100 routers for example) only have 4 wires so will not work for PoE.

Re: RB912UAG-5HPnD-OUT not working!

Posted: Wed Sep 11, 2013 7:09 am
by kometchtech
I've tried the cable of category 5e something of this, but none was also no good.
That'll sure do it :lol:

Also be sure when testing that your Ethernet cable has all 8 wires connected (look at RJ45). Some inexpensive cables (shipped with cheap soho 10/100 routers for example) only have 4 wires so will not work for PoE.

Re: RB912UAG-5HPnD-OUT not working!

Posted: Sat Nov 30, 2013 2:07 am
by scampbell
I was connected as shown in the image, but the power does not enter, it did not work.
In case anyone did not understand - the image is how NOT to connect the cable :-)

Power to Mikrotik is supplied via the socket connecter of the adapter using an additional RJ45 cable.

Re: RB912UAG-5HPnD-OUT not working!

Posted: Sat Nov 30, 2013 2:11 am
by kometchtech
Hi,

As you say, how to connect the cable seems to be bad.
We're now eliminated this problem.

Best regards
I was connected as shown in the image, but the power does not enter, it did not work.
In case anyone did not understand - the image is how NOT to connect the cable :-)

Power to Mikrotik is supplied via the socket connecter of the adapter using an additional RJ45 cable.