Community discussions

MUM Europe 2020
 
mauricioisp
Member Candidate
Member Candidate
Topic Author
Posts: 145
Joined: Wed Feb 06, 2013 2:48 am

RB912UAG-5HPnD-OUT throughput?

Sun Sep 22, 2013 6:59 am

Hi guys,
I'm considering to replace my Rocket M5s with the RB912UAG-5HPnD-OUT, I'm using 30dBi antenna and I've -50dBm signal strength, what would be the expected throughput with the RB912UAG-5HPnD-OUT?

Thanks,
 
User avatar
laithmikrotik
Member
Member
Posts: 427
Joined: Wed Apr 13, 2011 3:18 pm

Re: RB912UAG-5HPnD-OUT throughput?

Sun Sep 22, 2013 11:46 am

just use nv2/nsetrem wireless protocol and adjust noise floor threshold to -120/-124 and remember ; you can not use rb912 as a point to roocket m5 , you should use ptp with two mikrotik devices...
I LIKE MIKROTIK
 
InoX
Forum Guru
Forum Guru
Posts: 1966
Joined: Tue Jan 09, 2007 6:44 pm

Re: RB912UAG-5HPnD-OUT throughput?

Sun Sep 22, 2013 11:50 am

At least 170mbps.
 
mauricioisp
Member Candidate
Member Candidate
Topic Author
Posts: 145
Joined: Wed Feb 06, 2013 2:48 am

Re: RB912UAG-5HPnD-OUT throughput?

Sun Sep 22, 2013 5:59 pm

Hi inox,
That's pretty similar to the 160mbps aggregated throughput I can get with 2 rocket m5 in p2p. I was thinking of 200mbps+ performance, such as ligowave pro.
 
popcorrin
Member Candidate
Member Candidate
Posts: 189
Joined: Wed Mar 11, 2009 12:55 am

Re: RB912UAG-5HPnD-OUT throughput?

Sun Sep 22, 2013 9:12 pm

Hi inox,
That's pretty similar to the 160mbps aggregated throughput I can get with 2 rocket m5 in p2p. I was thinking of 200mbps+ performance, such as ligowave pro.
Just because the internal speedtest on airos shows 160mbps, that doesn't mean you can actually get that kind of throughput with a rocket m5.
With real traffic, you would be doing good to get 100mbps of actual throughput.
 
mauricioisp
Member Candidate
Member Candidate
Topic Author
Posts: 145
Joined: Wed Feb 06, 2013 2:48 am

Re: RB912UAG-5HPnD-OUT throughput?

Mon Sep 23, 2013 2:59 am

Why should I adjust noise floor threshold to -120/-124 ?

Thanks,
 
User avatar
laithmikrotik
Member
Member
Posts: 427
Joined: Wed Apr 13, 2011 3:18 pm

Re: RB912UAG-5HPnD-OUT throughput?

Mon Sep 23, 2013 10:39 am

Why should I adjust noise floor threshold to -120/-124 ?

Thanks,

to get high rx/tx signal strength with rx/tx ccq....i use this method just with ptp ................
I LIKE MIKROTIK
 
n21roadie
Forum Guru
Forum Guru
Posts: 1896
Joined: Fri Aug 07, 2009 10:36 pm
Location: Limerick,Ireland

Re: RB912UAG-5HPnD-OUT throughput?

Mon Sep 23, 2013 2:37 pm

Why should I adjust noise floor threshold to -120/-124 ?

Thanks,

to get high rx/tx signal strength with rx/tx ccq....i use this method just with ptp ................
Interesting tweak, currently testing on a PTP which was 58/56dBm and 59db SNR, now using -120 noise floor i have 50/52dBm and 68SNR, CCQ appears to much higher from 80% to 100% but as this link is not fully aligned I will wait till it is but a increase in signal and snr it's most welcome.
N21roadie,
Network 100% MT for Now?

Who is online

Users browsing this forum: Bing [Bot] and 35 guests