Community discussions

MUM Europe 2020
 
elkolo23
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 69
Joined: Mon May 28, 2007 9:30 pm

RB912UAG-5HPnD-OUT 13kms test

Wed Sep 25, 2013 8:51 am

today received couple of 912 outdoors

here the results at 12kms.

tomorrow ill post 65kms with 34db rocket dish.
You do not have the required permissions to view the files attached to this post.
 
elkolo23
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 69
Joined: Mon May 28, 2007 9:30 pm

Re: RB912UAG-5HPnD-OUT 13kms test

Wed Sep 25, 2013 9:34 am

now overclocked
You do not have the required permissions to view the files attached to this post.
 
n21roadie
Forum Guru
Forum Guru
Posts: 1896
Joined: Fri Aug 07, 2009 10:36 pm
Location: Limerick,Ireland

Re: RB912UAG-5HPnD-OUT 13kms test

Wed Sep 25, 2013 4:12 pm

Can i ask was the bandwidth test from RB912UAG-5HPnD to RB912UAG-5HPnD or a device before and beyond the RB912UAG-5HPnD pair?
N21roadie,
Network 100% MT for Now?
 
ste
Forum Guru
Forum Guru
Posts: 1817
Joined: Sun Feb 13, 2005 11:21 pm

Re: AW: RB912UAG-5HPnD-OUT 13kms test

Wed Sep 25, 2013 5:38 pm

Can i ask was the bandwidth test from RB912UAG-5HPnD to RB912UAG-5HPnD or a device before and beyond the RB912UAG-5HPnD pair?
Look at the picture. This is another speedtester who measures cpu instead of bandwidth.
I love my customers which complain that speed is to low. If I ask back they dont know if they measured Mbit or Mbyte/s ;-)
 
elkolo23
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 69
Joined: Mon May 28, 2007 9:30 pm

Re: RB912UAG-5HPnD-OUT 13kms test

Wed Sep 25, 2013 11:58 pm

Test from 912 to 912,, no other equipment between them.
 
onnoossendrijver
Member
Member
Posts: 418
Joined: Mon Jul 14, 2008 11:10 am
Location: The Netherlands

Re: RB912UAG-5HPnD-OUT 13kms test

Thu Sep 26, 2013 12:39 am

You should test as follows: connect on both sides of the link a PC to the Routerboard and run an Iperf session between them.
If you use btest on the Routerboard itself you are, in fact, testing its CPU and not the link.
Doing a TCP bandwith test on the router itself is very demanding for most routers. Running a bandwidth test THROUGH the router is far less CPU intensive and therefore a better test.
Linux/network engineer: ITIL, LPI1, CCNA R+S, CCNP R+S, JNCIA, JNCIS-SEC
 
n21roadie
Forum Guru
Forum Guru
Posts: 1896
Joined: Fri Aug 07, 2009 10:36 pm
Location: Limerick,Ireland

Re: RB912UAG-5HPnD-OUT 13kms test

Thu Sep 26, 2013 12:02 pm

Test from 912 to 912,, no other equipment between them.
As mentioned the best way to bandwidth test is,

Router A (connected to) 912 (PTP) 912 (connected to) Router B

Bandwidth test from RouterA to RouterB and not 912 to 912
N21roadie,
Network 100% MT for Now?
 
Jfabiopd
just joined
Posts: 5
Joined: Mon Jun 04, 2012 12:58 am

Re: RB912UAG-5HPnD-OUT 13kms test

Fri Oct 25, 2013 6:00 pm

today received couple of 912 outdoors

here the results at 12kms.

tomorrow ill post 65kms with 34db rocket dish.
Where is that link?

(se for Brasileiro como imagino)

Aonde foi feito este enlace amigo ?

Who is online

Users browsing this forum: Andrejm and 41 guests