I have mounted a Metal2SHPn device on the tower with 40m high. The POE device(I have used the original POE device sold by factory 24v/1A) is connected with 50m cat6 cable to the AP. My Antenna is 15dbi ALFA omnidirectional.
My problem is that changing the settings of the device (for example change the frequency) takes a long time to apply (I check this with my laptop)
But when I have tested this device in our office, the changes applied very fast.
Also the ping time(from client to AP) is not good in channel 1-13 but it is good in channel 14.
My position in testing is 50-100m long from the tower.
Any help will be appreciated