Community discussions

MUM Europe 2020
 
schorsch
newbie
Topic Author
Posts: 35
Joined: Mon Oct 11, 2004 5:21 pm
Location: Germany

CPE-Antenna alignment via customer / Application available?

Fri Apr 14, 2006 3:20 pm

We are planning to equip our new cpes with routerboards. Is there a possibility to allow the customer to allign the antenna without giving him access to the whole router? Maybe with an integrated webserver or with a client application via snmp?

Or do I have to write my own application?
 
cmit
Forum Guru
Forum Guru
Posts: 1552
Joined: Fri May 28, 2004 12:49 pm
Location: Germany

Fri Apr 14, 2006 9:50 pm

Let me dig in the office on Tuesday. I think I have something like this flying around my hard disk...

If I just forget to come back here, a short reminder to info at cmit dot de might help ;-)

Best regards,
Christian Meis
 
schorsch
newbie
Topic Author
Posts: 35
Joined: Mon Oct 11, 2004 5:21 pm
Location: Germany

Fri Apr 14, 2006 10:15 pm

Thanx!

Und: Schöne Ostern! :D
 
Arco van Bezooijen
newbie
Posts: 32
Joined: Sat Feb 05, 2005 1:33 pm
Location: The Netherlands
Contact:

Sat Apr 15, 2006 3:33 pm

hi cmit,

if you would be so kind to mail it to me too !

thanks in advance

arco
 
GotNet
Member
Member
Posts: 436
Joined: Fri May 28, 2004 7:52 pm
Location: Florida

Sat Apr 15, 2006 6:39 pm

Cmit, here too, please?

Mike
 
nuru
Frequent Visitor
Frequent Visitor
Posts: 50
Joined: Wed Jun 29, 2005 11:02 pm
Location: Kaduna, Nigeria

Sun Apr 16, 2006 8:58 am

Me too please.
 
User avatar
rickard
Member Candidate
Member Candidate
Posts: 145
Joined: Wed Jun 16, 2004 1:29 am
Location: Sweden
Contact:

Sun Apr 16, 2006 2:35 pm

HI All.

We have made a custom Apps that are pretty cool :-)
that uses both SNMP and Telnet. And we are showing the Signal with a grapich bar red,yellow,green for the signal strenght.
and you can set the SSID for diffrent base stations...
and soon we can let the Customers Scan and then connect.
and the apps is in the MT routerboard disk....
so we dont need any cd roms. And we uppdate the apps via ftp


if some one is intrested mail me on rickard@rbcom.se
 
cmit
Forum Guru
Forum Guru
Posts: 1552
Joined: Fri May 28, 2004 12:49 pm
Location: Germany

Tue Apr 18, 2006 12:50 pm

Ok, found it ;)

Short list of features:
Small client app to help clients/customers to align their (RouterOS based) CPE. (The CPE is queried by SNMP.)
The customer just enters the ip address of the CPE and presses "Start".

The app is showing you:
- system name
- MAC (wlan) of you CPE
- configured frequency
- wireless connection status (via a red/green signal)
- wireless signal strength (numeric dB and bar graph)

It's in last beta state, so I have to finish some things to get things running. Of course it's one single exe file, no installation, no registry trash, ...

I will offer that as a branded app to interested WISPs. Anyone interested please write me a short email to info at cmit dot de to get in touch.

Best regards,
Christian Meis
 
aviper
Member Candidate
Member Candidate
Posts: 187
Joined: Thu Sep 15, 2005 5:48 pm

Tue Apr 18, 2006 2:05 pm

/me queue up :)

aviper (at) mail (dot) bg
 
ejansson
Member
Member
Posts: 301
Joined: Fri Oct 21, 2005 4:09 pm
Location: Manitoba, Canada

Tue Apr 18, 2006 4:19 pm

The RB112's have a built in speaker/beeper. From my understanding this is to allow alaignment via a tone. I have not tried it so I do not know if it is functioning is in the software yet or not. But if/when this works it is a perfect tool for most self installs.

We also use the WaveRider product and one nice feature is the units are always available through the 169.254.10.250 ip address regardless of what the managment address has been configured for. You may recognize this as a block that windows will give an interface by default if it can not come up with a DHCP address. Has anyone used or considered using this block so any end user software could be set to communicate to the radio with out the user haveing to configure an IP address? Could be a fast and simple way to get novice end users to connect up to a radio and enter in information in cases where the AP has to be chosen. Or other location dependant information is required. I'm no programer so I can only help with the idea!

Erik
 
User avatar
dibatech
Frequent Visitor
Frequent Visitor
Posts: 81
Joined: Tue Apr 04, 2006 10:14 am

Program

Wed Apr 19, 2006 7:09 pm

So, who do i need to kiss to get this too :lol:
Also writing one in with delphi. Don't have snmp vcl though.
Everything scripted and parsed through telnet :x
willing to share code.
 
cmit
Forum Guru
Forum Guru
Posts: 1552
Joined: Fri May 28, 2004 12:49 pm
Location: Germany

Wed Apr 19, 2006 9:59 pm

OK, guys... No need to kiss anyone, actually (or do kiss your wife, if you have one ;) ).

I'm totally burried in the finishing stages of a project and not really in the office for the rest of this week.
I'll get back to everyone here and the ones who e-mailed me next week.
Let me at least get it translated to English - I suppose most of you won't make much use of it with a German user interface...

Best regards,
Christian Meis
 
schorsch
newbie
Topic Author
Posts: 35
Joined: Mon Oct 11, 2004 5:21 pm
Location: Germany

Sun Apr 30, 2006 12:23 am

Any news ???
 
User avatar
stephenpatrick
Forum Veteran
Forum Veteran
Posts: 703
Joined: Fri Aug 20, 2004 12:26 pm
Location: UK
Contact:

Mon May 01, 2006 8:20 pm

We have "RadioManager", runs on a PC or laptop, connects with Telnet or RS232 port, has easy-to-use RSSI (signal strength) bargraphs, and even audio tones for alignment using the PC sound system/speakers - great for CPEs that don't have any buzzers etc. Can be customised for operator/WISP OEM use.
All parameters can be viewed but password-ony access for "settable" items such as freq, SSID, etc. Allows authorised user to launch bandwidth tests etc. Ideal for corporate and WISP use.

An "old version" screenshot here:
http://www.cablefreesolutions.com/radio ... anager.jpg

Release version just about to be launched, a few days away (software is stable, just the registration portal being production-tested)
Any interest, do email us:
radiosupport (at) cablefreesolutions.com

Best news, it's free... :-)

Regards

CableFree Solutions
CableFree - Wireless Excellence - Microwave, E-band Radios, Free Space Optics, High performance Radios & Routers
http://www.cablefree.net
 
cmit
Forum Guru
Forum Guru
Posts: 1552
Joined: Fri May 28, 2004 12:49 pm
Location: Germany

Tue May 02, 2006 6:38 pm

So, anyone who has not contacted me via e-mail (Arco, Mike, Nuru, Dibatech?) just drop me a line at info at cmit dot de.

All others should have their eval version in their mailboxes...

Best regards,
Christian Meis
 
unlimitedme
Frequent Visitor
Frequent Visitor
Posts: 62
Joined: Tue Apr 24, 2007 1:01 pm

Re: CPE-Antenna alignment via customer / Application available?

Mon Aug 06, 2007 8:38 am

Chris, would you mind email me those app too? (unlimited_question2004 at yahoo dot com)
thx a lot
 
cmit
Forum Guru
Forum Guru
Posts: 1552
Joined: Fri May 28, 2004 12:49 pm
Location: Germany

Re: CPE-Antenna alignment via customer / Application available?

Mon Aug 06, 2007 12:06 pm

Just sent ;-)

Best regards,
Christian Meis
 
sofia.marques
just joined
Posts: 18
Joined: Mon Oct 09, 2006 7:23 pm

Re: CPE-Antenna alignment via customer / Application available?

Tue Aug 07, 2007 4:54 pm

Hi Chris,

Can you send it to me, please?
My email is: sofiamarq@iol.pt

Thanks a lot
 
User avatar
wiirus
just joined
Posts: 8
Joined: Fri Dec 09, 2005 11:50 pm

Re: CPE-Antenna alignment via customer / Application available?

Tue Aug 07, 2007 6:55 pm

Hi Chris,
Can you send it to me, please?
My email is: sofiamarq@iol.pt
Thanks a lot
And me please :oops:
info[at]levi[dot]ee
Last edited by wiirus on Thu Aug 09, 2007 8:04 am, edited 1 time in total.
 
nick52
just joined
Posts: 15
Joined: Mon Mar 19, 2007 3:30 pm
Location: Avezzano - Italy

Re: CPE-Antenna alignment via customer / Application available?

Tue Aug 07, 2007 7:27 pm

Hi Chris,
may you send it also to me, please?
My e-mail is: nicolaercole@libero.it

Thanks,
nick52
 
cmit
Forum Guru
Forum Guru
Posts: 1552
Joined: Fri May 28, 2004 12:49 pm
Location: Germany

Re: CPE-Antenna alignment via customer / Application available?

Wed Aug 08, 2007 6:02 pm

Sent to everyone who requested it until now ;-)

Best regards,
Christian Meis
 
GotNet
Member
Member
Posts: 436
Joined: Fri May 28, 2004 7:52 pm
Location: Florida

Re: CPE-Antenna alignment via customer / Application available?

Wed Aug 08, 2007 7:57 pm

I'd like to take a look, cmit. mike [at] akodi.net. Also customs, branding...

TNX
 
itsh.net
Member Candidate
Member Candidate
Posts: 115
Joined: Mon Jan 23, 2006 12:00 pm
Location: Germany
Contact:

Re: CPE-Antenna alignment via customer / Application available?

Wed Aug 08, 2007 8:41 pm

Hallo Christian,

Can you send it to me, please?
My email : edit...
Thanks
Last edited by itsh.net on Sun Jun 01, 2008 6:39 pm, edited 1 time in total.
 
route
newbie
Posts: 25
Joined: Tue Jun 13, 2006 8:36 pm

Re: CPE-Antenna alignment via customer / Application available?

Thu Aug 09, 2007 10:47 am

Hello,

Can you send it to me?

kamil [at] extendbroadband.com

Thanks
 
kiket
Frequent Visitor
Frequent Visitor
Posts: 56
Joined: Thu Mar 02, 2006 5:32 pm

Re: CPE-Antenna alignment via customer / Application available?

Thu Aug 09, 2007 11:27 am

I'd like to take a look,

kiket01(at)gmail.com

thanks cmit.
 
tpsretard
just joined
Posts: 23
Joined: Sat May 28, 2005 12:17 am

Re: CPE-Antenna alignment via customer / Application available?

Thu Aug 09, 2007 10:20 pm

i would like to take a look also..

jason.king [at] sunbeach dot net
 
fefo2006
just joined
Posts: 20
Joined: Sun May 13, 2007 5:27 pm

Re: CPE-Antenna alignment via customer / Application available?

Fri Aug 10, 2007 12:01 am

Hi, can you send for me, Cmit...
My email: fmelogno@hotmail.com
Thanks...
 
User avatar
jorj
Member
Member
Posts: 398
Joined: Mon Mar 12, 2007 4:34 pm
Location: /dev/null

Re: CPE-Antenna alignment via customer / Application available?

Fri Aug 10, 2007 10:54 am

If you could be so kind, i would like to see it too, Cmit. thx in advance
fanepix at yahoo dot com.
 
route
newbie
Posts: 25
Joined: Tue Jun 13, 2006 8:36 pm

Re: CPE-Antenna alignment via customer / Application available?

Fri Aug 10, 2007 12:10 pm

hello Cmit
can i test your software?
 
cmit
Forum Guru
Forum Guru
Posts: 1552
Joined: Fri May 28, 2004 12:49 pm
Location: Germany

Re: CPE-Antenna alignment via customer / Application available?

Fri Aug 10, 2007 3:40 pm

Yes - but I would need your e-mail address to send it to you ;-)

Either post here or write to info <at> cmit <dot> de

Best regards,
Christian Meis
 
route
newbie
Posts: 25
Joined: Tue Jun 13, 2006 8:36 pm

Re: CPE-Antenna alignment via customer / Application available?

Sat Aug 11, 2007 1:22 am

sorry :)
kamil [at] extendbroadband.com

thanks
 
jober
Long time Member
Long time Member
Posts: 692
Joined: Fri May 28, 2004 12:16 pm
Location: Louisiana,USA

Re: CPE-Antenna alignment via customer / Application available?

Sat Aug 11, 2007 8:13 am

jober [at] skycom1 dot com

Thanks :D
 
User avatar
GWISA-Kroonstad
Member Candidate
Member Candidate
Posts: 111
Joined: Fri Nov 10, 2006 3:34 pm

Re: CPE-Antenna alignment via customer / Application available?

Sat Aug 11, 2007 2:19 pm

Kindly... Appreciate..

support@gcs.co.za

Thx in advance
 
oz_gr
Member Candidate
Member Candidate
Posts: 126
Joined: Sat Jun 23, 2007 8:57 pm

Re: CPE-Antenna alignment via customer / Application available?

Sat Aug 11, 2007 2:24 pm

i would also love to have it cmit :D
 
User avatar
mneumark
Member
Member
Posts: 375
Joined: Thu Jun 08, 2006 7:20 am
Location: Escalon, CA
Contact:

Re: CPE-Antenna alignment via customer / Application available?

Sun Aug 12, 2007 8:31 am

I would also like a copy at matt <at> velociter <dot> net.

Thanks,
Matt
 
User avatar
Belyivulk
Member Candidate
Member Candidate
Posts: 285
Joined: Mon Mar 06, 2006 10:53 pm
Location: Whangarei, New Zealand
Contact:

Re: CPE-Antenna alignment via customer / Application available?

Mon Aug 13, 2007 9:11 am

likewise, please :)

service@uberpc.co.nz
 
User avatar
Gunzoid
Frequent Visitor
Frequent Visitor
Posts: 90
Joined: Tue Jun 12, 2007 6:21 am
Location: New Hampshire, USA
Contact:

Re: CPE-Antenna alignment via customer / Application available?

Fri Aug 17, 2007 4:36 pm

I'd like to try it out Christian.
TYVM
gberg at cyberpine.net
 
Lollo
newbie
Posts: 35
Joined: Tue Aug 07, 2007 9:10 pm

Re: CPE-Antenna alignment via customer / Application available?

Sat Aug 18, 2007 12:44 pm

Would be great if you could send it to me too :)

dexterp37 at gmail.com
 
0ldman
Forum Guru
Forum Guru
Posts: 1446
Joined: Thu Jul 27, 2006 5:01 am

Re: CPE-Antenna alignment via customer / Application available?

Sun Aug 19, 2007 7:14 am

Love to try it.
jgwaldrop at hotmail dot com
 
npbrasil
Frequent Visitor
Frequent Visitor
Posts: 83
Joined: Wed Jun 02, 2004 8:50 am

Re: CPE-Antenna alignment via customer / Application available?

Sun Aug 19, 2007 8:13 am

Me too, please. npbrasil <at> gmail (dot) com. Thanks!
 
User avatar
jagowan
Frequent Visitor
Frequent Visitor
Posts: 50
Joined: Wed Apr 04, 2007 5:34 am

Re: CPE-Antenna alignment via customer / Application available?

Sun Aug 19, 2007 8:52 am

Cmit, me to plz :D :D :D dianseh[at]sixnezer[dot]com thanks
 
franco
Member Candidate
Member Candidate
Posts: 142
Joined: Fri Feb 25, 2005 6:26 pm
Location: Germany

Re: CPE-Antenna alignment via customer / Application available?

Sun Aug 19, 2007 11:31 am

cmit, me too please.
My Email: francesco.l at web dot de
 
petyol
just joined
Posts: 8
Joined: Thu Jul 14, 2005 9:23 pm
Location: Seychelles
Contact:

Re: CPE-Antenna alignment via customer / Application available?

Mon Aug 20, 2007 7:55 pm

Hi ,

I would like to try the application also , please send it to francisvictor@seychelles.sc

Thanks

Francis
 
matthias
Frequent Visitor
Frequent Visitor
Posts: 54
Joined: Tue Jul 11, 2006 8:41 am

Re: CPE-Antenna alignment via customer / Application available?

Tue Aug 21, 2007 9:14 am

 
User avatar
interlink
newbie
Posts: 47
Joined: Wed Apr 26, 2006 5:18 am
Location: Ar Ros

Re: CPE-Antenna alignment via customer / Application available?

Tue Aug 21, 2007 2:32 pm

Me too please.
emiliano<at>cablenet<dot>com<dot>ar

tnx
 
dawam
Trainer
Trainer
Posts: 136
Joined: Wed May 31, 2006 1:40 pm
Location: Malaysia

Re: CPE-Antenna alignment via customer / Application available?

Fri Aug 24, 2007 10:13 am

Cmit,

can I hav a try too plz - matdawam [at] gmail [dot] com

thx
 
asterix_spawn
just joined
Posts: 1
Joined: Tue Jun 05, 2007 7:49 pm

Re: CPE-Antenna alignment via customer / Application available?

Fri Aug 24, 2007 9:57 pm

 
Robert_XX
just joined
Posts: 2
Joined: Tue May 22, 2007 4:32 pm

Re: CPE-Antenna alignment via customer / Application available?

Mon Aug 27, 2007 3:10 pm

Me too please :
robert_lipinski@derkom.pl
THX
 
timbaland1540
just joined
Posts: 6
Joined: Mon Sep 25, 2006 3:53 am

Re: CPE-Antenna alignment via customer / Application available?

Mon Aug 27, 2007 8:55 pm

um, rapidshare?
 
logo
newbie
Posts: 33
Joined: Wed Jul 25, 2007 12:07 am
Location: South Africa , Despatch , Port Elizabeth Area

Re: CPE-Antenna alignment via customer / Application available?

Mon Aug 27, 2007 10:11 pm

may i have this to
bigbrother@webmail.co.za
 
rauulu
just joined
Posts: 1
Joined: Wed Aug 29, 2007 9:33 am

Re: CPE-Antenna alignment via customer / Application available?

Wed Aug 29, 2007 9:36 am

Hallo Christian,

Can you send it to me, please?
My email : rauulu [at] gmail [dot] com

Thanks!
 
User avatar
surfnet
Member Candidate
Member Candidate
Posts: 253
Joined: Wed Sep 01, 2004 6:38 pm

Re: CPE-Antenna alignment via customer / Application available?

Wed Aug 29, 2007 5:13 pm

could I please have it as well? Ken@surfnetc dot com
 
User avatar
dallas
Long time Member
Long time Member
Posts: 547
Joined: Wed Dec 13, 2006 4:13 am
Location: Minnesota
Contact:

Re: CPE-Antenna alignment via customer / Application available?

Thu Aug 30, 2007 3:26 am

Could I please recieve the application?

dallas @ linuxsrv.net
Dallas
 
User avatar
mwi
newbie
Posts: 36
Joined: Sat May 27, 2006 8:03 pm
Location: Mooreland, IN

Re: CPE-Antenna alignment via customer / Application available?

Thu Aug 30, 2007 3:30 am

me too "Please" :lol: Thanks!
mwi (at) moorelandisp (dot) net
 
User avatar
mipland
Member Candidate
Member Candidate
Posts: 210
Joined: Thu Sep 14, 2006 4:02 am

Re: CPE-Antenna alignment via customer / Application available?

Thu Aug 30, 2007 10:02 am

Hy Christian, i already sent you an email, but never got an answer... :(
Can you send me the app? mip at cpuzone dot it
 
matthias
Frequent Visitor
Frequent Visitor
Posts: 54
Joined: Tue Jul 11, 2006 8:41 am

Re: CPE-Antenna alignment via customer / Application available?

Thu Aug 30, 2007 10:13 am

also got no answer till now :(
Possible to post a download link?
 
tganet
newbie
Posts: 36
Joined: Mon Jul 19, 2004 8:52 pm
Contact:

Re: CPE-Antenna alignment via customer / Application available?

Thu Aug 30, 2007 9:32 pm

Hi, Cris


you sent to me : sandro@tganet.com.br
 
steveloomis
newbie
Posts: 49
Joined: Sat Oct 09, 2004 1:56 am
Location: Oklahoma, USA

Re: CPE-Antenna alignment via customer / Application available?

Fri Aug 31, 2007 8:17 pm

Cmit, please send a copy, thanks for all you do.

steve at vroomwireless dot com
 
User avatar
chvdr
Member
Member
Posts: 403
Joined: Thu Sep 22, 2005 8:53 pm

Re: CPE-Antenna alignment via customer / Application available?

Sat Sep 01, 2007 9:22 am

Yes - but I would need your e-mail address to send it to you ;-)

Either post here or write to info <at> cmit <dot> de

Best regards,
Christian Meis
abuse[at]chirpan[dot]com

thanks,
C. G.
 
danielillu
Member Candidate
Member Candidate
Posts: 110
Joined: Sun Aug 27, 2006 5:37 am
Location: Barcelona, Spain

Re: CPE-Antenna alignment via customer / Application available?

Sat Sep 01, 2007 1:57 pm

How I wanted to have some programming skills to do an app like that.
Could you send me a copy: " danielillu [at] hotmail dot com "

Many thanks!
 
kad
just joined
Posts: 10
Joined: Sat Sep 30, 2006 5:14 pm

Re: CPE-Antenna alignment via customer / Application available?

Sun Sep 02, 2007 3:34 am

me too Please Thanks!
kadhemaaa(at) yahoo (dot) com
 
hytanium
Member Candidate
Member Candidate
Posts: 200
Joined: Thu Jan 18, 2007 9:10 pm

Re: CPE-Antenna alignment via customer / Application available?

Sun Sep 02, 2007 7:55 pm

I would like this too!

andreas[at]silowireless.com
 
User avatar
ghmorris
Member Candidate
Member Candidate
Posts: 284
Joined: Fri May 28, 2004 12:14 pm
Location: Minden, Ontario, Canada
Contact:

Re: CPE-Antenna alignment via customer / Application available?

Sun Sep 02, 2007 8:59 pm

Looks like a great app.

Me too please!

ghmorris (at) candlelight.ca

Thanks
George
 
ofasa
Member Candidate
Member Candidate
Posts: 104
Joined: Tue Jul 20, 2004 11:42 pm

Re: CPE-Antenna alignment via customer / Application available?

Mon Sep 03, 2007 3:58 pm

Me too, please. ofasa {at} yahoo {dot} com.

Thanks.
 
mr_antenna
just joined
Posts: 20
Joined: Mon Mar 13, 2006 8:11 pm

Re: CPE-Antenna alignment via customer / Application available?

Mon Sep 03, 2007 8:10 pm

may I try the software too please
antenna.mr (at) gmail (dot) com
 
dirman
just joined
Posts: 8
Joined: Mon Jan 02, 2006 8:44 am

Re: CPE-Antenna alignment via customer / Application available?

Wed Sep 05, 2007 7:32 pm

me too please
andrisoripada at gmail dot com
 
springwifi
just joined
Posts: 9
Joined: Sun Jun 17, 2007 1:41 am

Re: CPE-Antenna alignment via customer / Application available?

Thu Sep 06, 2007 1:25 am

I found this site that hosts the Radio Manager software.

http://www.cablefreecommunications.com/

I really like the app. except it really needs the ability to check RSSI via SNMP.
I wouldn't want to give out any telnet passwords to our customers.
 
danielillu
Member Candidate
Member Candidate
Posts: 110
Joined: Sun Aug 27, 2006 5:37 am
Location: Barcelona, Spain

Re: CPE-Antenna alignment via customer / Application available?

Thu Sep 06, 2007 1:33 am

Thanls springwifi, but the download link you provided doesn't work, now. Maybe is a temporal error
 
hytanium
Member Candidate
Member Candidate
Posts: 200
Joined: Thu Jan 18, 2007 9:10 pm

Re: CPE-Antenna alignment via customer / Application available?

Thu Sep 06, 2007 5:09 am

 
User avatar
stephenpatrick
Forum Veteran
Forum Veteran
Posts: 703
Joined: Fri Aug 20, 2004 12:26 pm
Location: UK
Contact:

Re: CPE-Antenna alignment via customer / Application available?

Thu Sep 06, 2007 10:11 am

Both links should be correct - one leads to the other.
Just for clarity, that's CableFree's Radiomanager software, which is a Windows GUI, works with most versions of ROS, is frequently updated (with auto version update prompt) and lets you see most aspects of a radio configuration - ideal for P2P links as well as base stations and CPEs.

The software was written to run with our own-brand hardware, but will run with any MT/ROS box.
You do need to put a custom script on your radio to use it - adds a unique user/password for the software to log on.
Drop me a mail at stephen <dot> patrick [at] cablefree <dot> co <dot> uk and we'll send it over.

We welcome feedback for any features users would like to see in our software.

Regards

CableFree Solutions
 
eburgash
just joined
Posts: 5
Joined: Thu May 24, 2007 2:05 am
Location: Ellensburg, WA
Contact:

Re: CPE-Antenna alignment via customer / Application available?

Fri Sep 07, 2007 8:59 am

Please sent to support at eburg dot com

Thank you
 
tganet
newbie
Posts: 36
Joined: Mon Jul 19, 2004 8:52 pm
Contact:

Re: CPE-Antenna alignment via customer / Application available?

Sat Sep 08, 2007 5:29 pm

Whats a user and password necessary for connect using a Radio Manager, i dont connect in my Wireless Radios, dont have acess !!!


Sandro
 
User avatar
stephenpatrick
Forum Veteran
Forum Veteran
Posts: 703
Joined: Fri Aug 20, 2004 12:26 pm
Location: UK
Contact:

Re: CPE-Antenna alignment via customer / Application available?

Mon Sep 10, 2007 10:50 am

Dear Sandro,
Do drop us an email, we'll send you the script.
It's requested not to put it on a public forum, because of the obvious security risk.

Best regards

CableFree Solutions
 
cmit
Forum Guru
Forum Guru
Posts: 1552
Joined: Fri May 28, 2004 12:49 pm
Location: Germany

Re: CPE-Antenna alignment via customer / Application available?

Wed Sep 12, 2007 7:09 pm

OK, everybody who hasn't gotten the eval version in his e-mail box until now - I have resent it to those, as there seems to have been some problem with that mail not reaching several people.
If you requested it and still don't have it in your inbox until in about 10 minutes, please send a short notification to me by email - thanks!

Best regards,
Christian Meis
 
Qusay
newbie
Posts: 43
Joined: Mon May 22, 2006 2:49 pm

Re: CPE-Antenna alignment via customer / Application available?

Sat Sep 15, 2007 2:47 am

Cmit; Thanks..
And if you can make it as Orinoco software, I'll be happy to bye it.

Thaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaanks
 
lcrhea25
Member Candidate
Member Candidate
Posts: 114
Joined: Wed Nov 29, 2006 4:30 pm

Re: CPE-Antenna alignment via customer / Application available?

Tue Sep 18, 2007 11:48 pm

I downloaded it from the link above and I am getting Run-time error '429': ActiveX component can't create object. My email is lljr@1starnet.com if there is a different install file I need.

Thank you!
 
Znuff
Member Candidate
Member Candidate
Posts: 141
Joined: Tue Sep 26, 2006 2:42 am
Contact:

Re: CPE-Antenna alignment via customer / Application available?

Wed Sep 19, 2007 6:02 am

Me too pretty please.

znuffy@gmail.com

Gmail doesn't accept .exe's, or zipped .exe's, so you should mail it as a rar or something :-)

Thanks
 
bushy
Member Candidate
Member Candidate
Posts: 140
Joined: Thu Oct 20, 2005 11:56 pm
Location: Ireland

Re: CPE-Antenna alignment via customer / Application available?

Sat Sep 22, 2007 2:44 am

Any chance of a symbian version ? I do this atm : http://wiki.mikrotik.com/wiki/CPE_alignment_method
 
rodneal
Member Candidate
Member Candidate
Posts: 223
Joined: Mon Mar 12, 2007 7:49 pm

Re: CPE-Antenna alignment via customer / Application available?

Fri Sep 28, 2007 3:43 pm

Hey Christian,
Always appreciate reading your comments on the forums.
I would like to test your app.
rodneal at htwc dot biz

Thank you,
Rod
 
pipis9242
just joined
Posts: 4
Joined: Wed Feb 22, 2006 4:02 am

Re: CPE-Antenna alignment via customer / Application available?

Sun Sep 30, 2007 7:10 am

Thanks in advance :)

telstar924 at yahoo dot com
 
vonsyp
just joined
Posts: 6
Joined: Thu May 24, 2007 1:26 am

Re: CPE-Antenna alignment via customer / Application available?

Mon Oct 01, 2007 3:12 am

Hi
Also want to try it too. Many thank's

email: mikrotik at mls dot nc
 
mickeymouse690
Member Candidate
Member Candidate
Posts: 105
Joined: Sun May 20, 2007 3:08 am

Re: CPE-Antenna alignment via customer / Application available?

Mon Oct 01, 2007 7:20 am

Hi Chris, Canadian WISP here, would liek to give her a go also pls.

admin (at) pogosansfil (dot) net

Vielen Dank
 
Mark74
just joined
Posts: 6
Joined: Sat May 12, 2007 1:52 pm

Re: CPE-Antenna alignment via customer / Application available?

Sat Oct 06, 2007 1:06 pm

hello Christian
can i have your software?


My e-mail is spiller.marco@tiscali.it

thanks
 
User avatar
samsoft08
Long time Member
Long time Member
Posts: 617
Joined: Sat Nov 26, 2005 10:52 pm

Re: CPE-Antenna alignment via customer / Application available?

Tue Oct 09, 2007 11:20 pm

hello Christian
can i have your software?

My e-mail is samsoft08@yahoo.com

thanks
 
onowojemma
Member Candidate
Member Candidate
Posts: 129
Joined: Sun Sep 11, 2005 5:27 pm
Location: Nigeria

Re: CPE-Antenna alignment via customer / Application available?

Sun Oct 14, 2007 6:20 am

Hi Chris can i have it for a try?
my email is onowojemma[at]yahoo.com
Thanks
Mikrotik! making networking easy
 
miraged
just joined
Posts: 1
Joined: Wed Oct 17, 2007 12:30 pm

Re: CPE-Antenna alignment via customer / Application available?

Wed Oct 17, 2007 12:32 pm

hello Christian
can i also have your software?
My email is mirazhiukas (at) gmail dot com

thanks a lot
 
gun89
just joined
Posts: 1
Joined: Mon Apr 16, 2007 9:26 am

Re: CPE-Antenna alignment via customer / Application available?

Tue Oct 23, 2007 7:19 pm

Would be great if you could send it to me too,
gun@kirz.com
 
springwifi
just joined
Posts: 9
Joined: Sun Jun 17, 2007 1:41 am

Re: CPE-Antenna alignment via customer / Application available?

Mon Oct 29, 2007 12:14 am

I would also like to give it a try.

rob <at> springwifi <dot> com
 
BS85
newbie
Posts: 25
Joined: Sun May 28, 2006 8:52 am
Location: UK

Re: CPE-Antenna alignment via customer / Application available?

Mon Oct 29, 2007 12:18 am

Could you send it to me also

kawaki85 (at) yahoo (dot) co (dot) uk

Thanks
 
gesseld
just joined
Posts: 3
Joined: Mon May 15, 2006 7:37 pm

Re: CPE-Antenna alignment via customer / Application available?

Mon Oct 29, 2007 5:53 am

 
pockettodd
just joined
Posts: 1
Joined: Mon Feb 11, 2008 11:05 pm

Re: CPE-Antenna alignment via customer / Application available?

Tue Feb 12, 2008 10:29 pm

Could I also get the script... brandenburg.todd@gmail.com thanks
 
ihernandez
Member Candidate
Member Candidate
Posts: 151
Joined: Sat Apr 12, 2008 4:18 pm

Re: CPE-Antenna alignment via customer / Application available?

Sat Apr 12, 2008 4:23 pm

Hello cmit,

If you would be so kind to mail it to me too !

thanks in advance

ihernandez at c-com dot net dot ve or
ignaciohernandezr at gmail dot com

:D
Regards,
Ignacio
 
ebarriosjr
just joined
Posts: 9
Joined: Sat May 31, 2008 9:00 pm

Re: CPE-Antenna alignment via customer / Application available?

Sat May 31, 2008 9:03 pm

Hello cmit,

If you would be so kind to mail it to me too !

thanks in advance

ebarriosjr at gmail dot com
 
tganet
newbie
Posts: 36
Joined: Mon Jul 19, 2004 8:52 pm
Contact:

Re: CPE-Antenna alignment via customer / Application available?

Sat May 31, 2008 10:43 pm

Hi, mail me to, Cmit...
My email: sandro@tganet.com.br
Thanks...
 
SweetSunday
Member Candidate
Member Candidate
Posts: 296
Joined: Tue Nov 07, 2006 3:06 am

Re: CPE-Antenna alignment via customer / Application available?

Sun Jun 01, 2008 12:56 am

G'day Cmit.

If you have any left could you mail me a copy at:

tony@clovabay.net.nz

Vielen Dank.
 
User avatar
jrecabeitia
Frequent Visitor
Frequent Visitor
Posts: 86
Joined: Tue Jun 05, 2007 2:26 pm
Location: Villa Dolores - Cordoba - Argentina
Contact:

Re: CPE-Antenna alignment via customer / Application available?

Sun Jun 01, 2008 2:51 pm

Could you send it to me also
jrecabeitia@talahenen.com.ar
 
User avatar
BulleriNET
Member Candidate
Member Candidate
Posts: 100
Joined: Sat Feb 11, 2006 9:30 pm
Location: prescott az 86301

Re: CPE-Antenna alignment via customer / Application available?

Mon Jun 02, 2008 7:03 pm

sent to me also if you could

rclark@bulleri.net
 
hurley12345
just joined
Posts: 19
Joined: Tue May 22, 2007 12:47 pm

Re: CPE-Antenna alignment via customer / Application available?

Tue Jun 03, 2008 1:59 pm

Could you send it to me also

brendanhurley@gmail.com

ta
 
matthias
Frequent Visitor
Frequent Visitor
Posts: 54
Joined: Tue Jul 11, 2006 8:41 am

Re: CPE-Antenna alignment via customer / Application available?

Tue Jun 03, 2008 2:53 pm

Hello Mikrotik Support,

don´t you see how many people need a tool with which they can monitor the Signal strenghts for installation of a CPE?!

So - why don´t you integrate a signal monitor in ROS where we (or our customers) can see the singal strengths of the wireless interface!
I think integration would be quite simple for you and would give us a real adavantage!

maybe by typing the ip address of the ether if into a webbrowser (like the admin tool works atm).
The admin tool could move to ip-adress/admin or so...

Please be so kind and have a look at this issue.
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24337
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: CPE-Antenna alignment via customer / Application available?

Tue Jun 03, 2008 2:59 pm

you can use the wireless align mode with the beeper.
No answer to your question? How to write posts
 
User avatar
jordantrx
Long time Member
Long time Member
Posts: 505
Joined: Tue Oct 23, 2007 8:58 pm
Location: WAY upstate NY

Re: CPE-Antenna alignment via customer / Application available?

Tue Jun 03, 2008 5:12 pm

Hey Cmit, I E-mailed you a while ago but no reply. If you have a chance or Anyone else that has it and can send it to me it would be very much appreciated.


E-mail @ jbwireless4you@gmail.com Thanks. -Jordan
~Agricultural WISP "ZONE"~ Beware of oncoming cattle and dont hit the farmer!!! I need to ask him about using his silo for an AP first"~

*Automated Billing Installer* http://wiki.mikrotik.com/wiki/AutomatedBilling Built by Krige ;-)
 
matthias
Frequent Visitor
Frequent Visitor
Posts: 54
Joined: Tue Jul 11, 2006 8:41 am

Re: CPE-Antenna alignment via customer / Application available?

Tue Jun 03, 2008 10:30 pm

you can use the wireless align mode with the beeper.
beeper is not really the right thing if you (or a customer) is installing a CPE!
Or why do you think everybody asks for such a tool?

most competitors have something where you can see the signal strenghts - not only because it is funny...

And i think this is really no work for mikrotik but an advantage for every user...
 
User avatar
jordantrx
Long time Member
Long time Member
Posts: 505
Joined: Tue Oct 23, 2007 8:58 pm
Location: WAY upstate NY

Re: CPE-Antenna alignment via customer / Application available?

Wed Jun 04, 2008 12:13 am

you can use the wireless align mode with the beeper.
beeper is not really the right thing if you (or a customer) is installing a CPE!
Or why do you think everybody asks for such a tool?

most competitors have something where you can see the signal strenghts - not only because it is funny...

And i think this is really no work for mikrotik but an advantage for every user...
Mikrotik does have a signal reading go into the registered tab it gives signal strength etc etc. but a nice tool like this may eas install's :-)
~Agricultural WISP "ZONE"~ Beware of oncoming cattle and dont hit the farmer!!! I need to ask him about using his silo for an AP first"~

*Automated Billing Installer* http://wiki.mikrotik.com/wiki/AutomatedBilling Built by Krige ;-)
 
SweetSunday
Member Candidate
Member Candidate
Posts: 296
Joined: Tue Nov 07, 2006 3:06 am

Re: CPE-Antenna alignment via customer / Application available?

Wed Jun 04, 2008 8:36 am

you can use the wireless align mode with the beeper.
Well I just tried /interface wireless align monitor on an RB133C running v3.9 and it immediately rammed the CPU usage to 100% and produced no results for over a minute. Closed the console and the CPU rate remained at 100% for several more minutes before it returned to 'normal'.

Having already had to 'downgrade' several routers from v3.x to 2.9.51 because of problems I'm beginning to suspect that the 'smaller RAM' versions of the 100 series at least just can't cope with v3.
 
matthias
Frequent Visitor
Frequent Visitor
Posts: 54
Joined: Tue Jul 11, 2006 8:41 am

Re: CPE-Antenna alignment via customer / Application available?

Wed Jun 04, 2008 10:06 am

Mikrotik does have a signal reading go into the registered tab it gives signal strength etc etc. but a nice tool like this may eas install's :-)
yes - but i think thats all too difficult.
We only want to tell our customer: "got to "ip-address" and there you´ll see your signal Strength.
There shoud be a signal value and maybe some graphic wichs shows a "Signal-Graph" with red, yellow and green colours (depending on the signal strenghts)...
So the customer needs no technical know how - he just has to type in an address and could see if the signal is good or not...
 
ste
Forum Guru
Forum Guru
Posts: 1816
Joined: Sun Feb 13, 2005 11:21 pm

Re: CPE-Antenna alignment via customer / Application available?

Wed Jun 04, 2008 10:38 am

Mikrotik does have a signal reading go into the registered tab it gives signal strength etc etc. but a nice tool like this may eas install's :-)
yes - but i think thats all too difficult.
We only want to tell our customer: "got to "ip-address" and there you´ll see your signal Strength.
There shoud be a signal value and maybe some graphic wichs shows a "Signal-Graph" with red, yellow and green colours (depending on the signal strenghts)...
So the customer needs no technical know how - he just has to type in an address and could see if the signal is good or not...
We've found that it's better to tell the customer to give us a call when he aligns his
antenna. So he needs only a cellphone while he's climbing his roof. With a client
app he has to take his laptop up (if he has one) and has additional cabling, ...
Only alternative would be an led-row at the back of the routenna showing signalstrength.

Stefan
 
matthias
Frequent Visitor
Frequent Visitor
Posts: 54
Joined: Tue Jul 11, 2006 8:41 am

Re: CPE-Antenna alignment via customer / Application available?

Wed Jun 04, 2008 11:18 am

we have also "non-Mikrotik" CPEs wich show us the signal via web-interface like I wrote before...
And there is nearly no one that cannont handle the installation by himself.

With Mikrotik CPEs we have to use the tool from cmit (which does not work if the wlan if is in a bridge) or have to call/drive to the custumer -> cost´s a lot of time...
 
arffer
just joined
Posts: 21
Joined: Tue Mar 29, 2005 3:14 am

Re: CPE-Antenna alignment via customer / Application available?

Sun Jun 22, 2008 7:59 am

cmit,

If you are still giving out the script to create the special username/password, I'd sure appreciate a copy.

Thanks!

alan@fiebig.us
 
User avatar
hulk-bd
Member Candidate
Member Candidate
Posts: 227
Joined: Mon Sep 03, 2007 7:19 pm
Location: Uttara, Dhaka, Bangladesh

Re: CPE-Antenna alignment via customer / Application available?

Sun Jun 22, 2008 4:51 pm

I'm surprised I havn't asked for the software yet, So dear Cmit can you please send me a copy of your software. e-mail: info at vnet-bd dot com.

Many thanks in advance
Don't worry, be happy :) .......
 
arffer
just joined
Posts: 21
Joined: Tue Mar 29, 2005 3:14 am

Re: CPE-Antenna alignment via customer / Application available?

Fri Jul 04, 2008 3:45 am

cmit, are you still active on this thread, and if so, are you still offering the script? I have downloaded your application, and would like to try it on some of my mikrotik routers, but need the script to do so.

Is that script to create the special username/password for this application available anywhere, from anyone, else?

Thanks!
cmit,

If you are still giving out the script to create the special username/password, I'd sure appreciate a copy.

Thanks!

alan@fiebig.us
 
cmit
Forum Guru
Forum Guru
Posts: 1552
Joined: Fri May 28, 2004 12:49 pm
Location: Germany

Re: CPE-Antenna alignment via customer / Application available?

Fri Jul 04, 2008 12:01 pm

Ehm, now I'm lost somewhere ;-) ...

What script for a "special username/password" do you mean?
The thread here was about an app for CPE alignment...
Best regards,
Christian Meis
 
User avatar
jordantrx
Long time Member
Long time Member
Posts: 505
Joined: Tue Oct 23, 2007 8:58 pm
Location: WAY upstate NY

Re: CPE-Antenna alignment via customer / Application available?

Fri Jul 04, 2008 4:06 pm

Ehm, now I'm lost somewhere ;-) ...

What script for a "special username/password" do you mean?
The thread here was about an app for CPE alignment...
So are you holding onto this Antenna alignment tool? Just lemme know I wount bother you anymore :)
~Agricultural WISP "ZONE"~ Beware of oncoming cattle and dont hit the farmer!!! I need to ask him about using his silo for an AP first"~

*Automated Billing Installer* http://wiki.mikrotik.com/wiki/AutomatedBilling Built by Krige ;-)
 
arffer
just joined
Posts: 21
Joined: Tue Mar 29, 2005 3:14 am

Re: CPE-Antenna alignment via customer / Application available?

Fri Jul 04, 2008 11:38 pm

Ehm, now I'm lost somewhere ;-) ...

What script for a "special username/password" do you mean?
The thread here was about an app for CPE alignment...
Perhaps there are two different applications being discussed on this thread?
The software was written to run with our own-brand hardware, but will run with any MT/ROS box.
You do need to put a custom script on your radio to use it - adds a unique user/password for the software to log on.

Do drop us an email, we'll send you the script. It's requested not to put it on a public forum, because of the obvious security risk.
cmit, if the above mentioned script is for an application different from yours, could you then please email me a copy of your application to alan@fiebig.us?

Thanks!
 
Muqatil
Trainer
Trainer
Posts: 574
Joined: Mon Mar 03, 2008 1:03 pm
Location: London - UK
Contact:

Re: CPE-Antenna alignment via customer / Application available?

Tue Jul 15, 2008 12:59 pm

I would love to evaluate your software aswell..
..but no kisses for you!

renato.bernardi {at} medianetitalia.net
Renato Bernardi

skype: medtech5
 
mniche
just joined
Posts: 1
Joined: Thu Jan 12, 2006 2:09 pm

Re: CPE-Antenna alignment via customer / Application available?

Thu Sep 11, 2008 8:08 pm

hello Christian
can i have your software?


My e-mail is mniche@cox.net

thanks

Kevin
 
User avatar
stephenpatrick
Forum Veteran
Forum Veteran
Posts: 703
Joined: Fri Aug 20, 2004 12:26 pm
Location: UK
Contact:

Re: CPE-Antenna alignment via customer / Application available?

Fri Sep 12, 2008 9:57 pm

Just for completeness/clear up confusion:
"radiomanager" is from our company, CableFree.
You have to put a script on the box to allow the software to connect.
But, the current version doesn't support 3.x, a new version is due soon.

Regards
CableFree - Wireless Excellence - Microwave, E-band Radios, Free Space Optics, High performance Radios & Routers
http://www.cablefree.net
 
belefor
just joined
Posts: 7
Joined: Fri Jun 01, 2007 10:15 am

Re: CPE-Antenna alignment via customer / Application available?

Wed Sep 17, 2008 10:31 am

hey Cmit can you please send to me that software so i can test it?

mail support@netwave.co.za


Kindly Regards
 
darkwarrior
just joined
Posts: 18
Joined: Wed Aug 15, 2007 4:40 pm

Re: CPE-Antenna alignment via customer / Application available?

Thu Sep 25, 2008 4:35 pm

Cmit,
You send to me please?

jeancog84@hotmail.com

Thanks
 
blignaut
just joined
Posts: 12
Joined: Mon Mar 17, 2008 10:52 am

Re: CPE-Antenna alignment via customer / Application available?

Thu Sep 25, 2008 5:12 pm

 
amartini6
just joined
Posts: 6
Joined: Wed Dec 03, 2008 4:20 pm

Re: CPE-Antenna alignment via customer / Application available?

Wed Dec 03, 2008 4:21 pm

please send it to me also:

amartini6@inwind.it

thank you
 
telematics09
just joined
Posts: 9
Joined: Wed Nov 26, 2008 2:54 pm

Re: CPE-Antenna alignment via customer / Application available?

Thu Dec 04, 2008 11:28 am

Can I have the script for special username/password please?
Is RadioManager now compatible with ROS 3.x?
guyver30@gmail.com
 
uomogamma
just joined
Posts: 10
Joined: Mon Dec 08, 2008 11:00 am

Re: CPE-Antenna alignment via customer / Application available?

Mon Dec 08, 2008 11:05 am

Very very useful and intresting... :-)
Can You send to me please?

uomogamma@gmail.com

Thanks so much

M.
 
Tbird
Frequent Visitor
Frequent Visitor
Posts: 55
Joined: Tue Dec 09, 2008 8:32 pm

Re: CPE-Antenna alignment via customer / Application available?

Tue Dec 09, 2008 8:59 pm

Witelcom (http://www.witelcom.com) have a software called RAT on their support page - works fine...
 
tomswenson
Member Candidate
Member Candidate
Posts: 111
Joined: Wed Apr 13, 2005 11:17 pm

Re: CPE-Antenna alignment via customer / Application available?

Wed Dec 10, 2008 9:53 pm

The Rat software seems to need a password for the zip. I couldn't open it.

Tom
 
Tbird
Frequent Visitor
Frequent Visitor
Posts: 55
Joined: Tue Dec 09, 2008 8:32 pm

Re: CPE-Antenna alignment via customer / Application available?

Wed Dec 10, 2008 11:46 pm

Yeah, you're right - I e-mailed their support or info and got a password - I'll see if I can find it.

In the jpg you can see how it looks like. Turns amber and red for lower signal levels. It has big numbers so it's easy to see - even from distance. Seen some limitations though; only station mode and the OID must be right or else it tend to hang...
You do not have the required permissions to view the files attached to this post.
 
User avatar
jordantrx
Long time Member
Long time Member
Posts: 505
Joined: Tue Oct 23, 2007 8:58 pm
Location: WAY upstate NY

Re: CPE-Antenna alignment via customer / Application available?

Sun Dec 14, 2008 11:13 pm

Yeah, you're right - I e-mailed their support or info and got a password - I'll see if I can find it.

In the jpg you can see how it looks like. Turns amber and red for lower signal levels. It has big numbers so it's easy to see - even from distance. Seen some limitations though; only station mode and the OID must be right or else it tend to hang...
Password is public Dogggs :-)
~Agricultural WISP "ZONE"~ Beware of oncoming cattle and dont hit the farmer!!! I need to ask him about using his silo for an AP first"~

*Automated Billing Installer* http://wiki.mikrotik.com/wiki/AutomatedBilling Built by Krige ;-)
 
tomswenson
Member Candidate
Member Candidate
Posts: 111
Joined: Wed Apr 13, 2005 11:17 pm

Re: CPE-Antenna alignment via customer / Application available?

Mon Dec 15, 2008 4:50 pm

Thanks for looking it up, but they must have changed the password.

Tom
 
ste
Forum Guru
Forum Guru
Posts: 1816
Joined: Sun Feb 13, 2005 11:21 pm

Re: CPE-Antenna alignment via customer / Application available?

Mon Dec 15, 2008 6:03 pm

Thanks for looking it up, but they must have changed the password.

Tom
Got the software today. There was no password. Works fine for me.

Stefan
 
tomswenson
Member Candidate
Member Candidate
Posts: 111
Joined: Wed Apr 13, 2005 11:17 pm

Re: CPE-Antenna alignment via customer / Application available?

Mon Dec 15, 2008 6:15 pm

I downloaded it again and also no problem or password this time, thanks.

Tom
 
tomswenson
Member Candidate
Member Candidate
Posts: 111
Joined: Wed Apr 13, 2005 11:17 pm

Re: CPE-Antenna alignment via customer / Application available?

Mon Dec 15, 2008 6:52 pm

I didn't catch the part about only working in station mode, that must be why it isn't working for me. I cant find a way to use station mode instead of station-pseudobridge and give a customer a public address without natting.

Tom
 
User avatar
jordantrx
Long time Member
Long time Member
Posts: 505
Joined: Tue Oct 23, 2007 8:58 pm
Location: WAY upstate NY

Re: CPE-Antenna alignment via customer / Application available?

Mon Dec 15, 2008 6:57 pm

I didn't catch the part about only working in station mode, that must be why it isn't working for me. I cant find a way to use station mode instead of station-pseudobridge and give a customer a public address without natting.

Tom
asked me for a pass e-mailed them and they said pass is "Public" put it in and it worked.
~Agricultural WISP "ZONE"~ Beware of oncoming cattle and dont hit the farmer!!! I need to ask him about using his silo for an AP first"~

*Automated Billing Installer* http://wiki.mikrotik.com/wiki/AutomatedBilling Built by Krige ;-)
 
Tbird
Frequent Visitor
Frequent Visitor
Posts: 55
Joined: Tue Dec 09, 2008 8:32 pm

Re: CPE-Antenna alignment via customer / Application available?

Mon Dec 15, 2008 11:42 pm

I contacted them the other day - since I could not find the password again, and they said; Oops, no need for password on this - we'll remove it"

The software is made for WISP, and made to i.e. run directly from a CD. It expect you to be connected to a CPE in station mode with NAT and DHCP service. It will grab your PCs default gateway (the CPE then) and use SNMP to poll with the predefined community string. Quite clever and works nice for DIY installations.

You can point it to other IP-addresses also, but the OID must be correct - default for wlan1. I've seen that changing a wlan card messes this up (due to OID counter), and a system reset is required to get it working. Don't know if it works in sudo-bridge - we don't use it. Makes less sense to try on a base station I guess...
 
nilspils
just joined
Posts: 5
Joined: Tue Dec 16, 2008 7:46 am

Re: CPE-Antenna alignment via customer / Application available?

Tue Dec 16, 2008 9:42 pm

What do thay meen by "the OID must bee the same"
 
Tbird
Frequent Visitor
Frequent Visitor
Posts: 55
Joined: Tue Dec 09, 2008 8:32 pm

Re: CPE-Antenna alignment via customer / Application available?

Wed Dec 17, 2008 12:11 am

I did not say "the OID must be the same", did I?
I said "the OID must be correct - default for wlan1"
 
nilspils
just joined
Posts: 5
Joined: Tue Dec 16, 2008 7:46 am

Re: CPE-Antenna alignment via customer / Application available?

Wed Dec 17, 2008 5:44 pm

I did not say "the OID must be the same", did I?
I said "the OID must be correct - default for wlan1"
Wath do you meen by that? :)
 
Tbird
Frequent Visitor
Frequent Visitor
Posts: 55
Joined: Tue Dec 09, 2008 8:32 pm

Re: CPE-Antenna alignment via customer / Application available?

Wed Dec 17, 2008 11:25 pm

I did not say "the OID must be the same", did I?
I said "the OID must be correct - default for wlan1"
Wath do you meen by that? :)
Well, it's in my post:

"You can point it to other IP-addresses also, but the OID must be correct - default for wlan1. I've seen that changing a wlan card messes this up (due to OID counter), and a system reset is required to get it working"

You will have to try for yourselves here...
 
xezen
Long time Member
Long time Member
Posts: 628
Joined: Fri May 30, 2008 10:23 am
Location: South Africa

Re: CPE-Antenna alignment via customer / Application available?

Tue Dec 23, 2008 8:37 am

me to please

xezen182x@gmail.com
If i dont No Ask someone That Does!
 
nexus717
just joined
Posts: 1
Joined: Sat Jan 03, 2009 11:09 pm

Re: CPE-Antenna alignment via customer / Application available?

Sat Jan 03, 2009 11:34 pm

can i have it too? oinioin@yahoo.com,thanks alot
 
Tbird
Frequent Visitor
Frequent Visitor
Posts: 55
Joined: Tue Dec 09, 2008 8:32 pm

Re: CPE-Antenna alignment via customer / Application available?

Fri Jan 09, 2009 7:50 pm

There is a new RAT1.6 beta out for this - also supports UBNT/AirOS now. I've tried it - works!

Seems like some guys missed that RAT is for public download - don't have to ask anyone for it...
 
gimmepatiencequickly
newbie
Posts: 35
Joined: Wed Jan 30, 2008 1:00 pm
Location: South Africa

Re: CPE-Antenna alignment via customer / Application available?

Wed Jan 14, 2009 11:11 pm

lol,

How about a WWW/FTP server, and allowing people to DL it?
That way we do not have to publish our email addresses over the internet.

Software sounds good though, would like to get a copy too.

Thanks
:)
Defer not till tomorrow to be wise, tomorrow's sun to thee may never
rise.
--- William Congreve
 
Tbird
Frequent Visitor
Frequent Visitor
Posts: 55
Joined: Tue Dec 09, 2008 8:32 pm

Re: CPE-Antenna alignment via customer / Application available?

Sat Jan 24, 2009 10:19 pm

LOL on you then - if you scroll up that's exactly what you find - a WEB URL...
 
pepeucalp
just joined
Posts: 4
Joined: Mon Apr 11, 2005 7:51 pm

Re: CPE-Antenna alignment via customer / Application available?

Mon Mar 02, 2009 5:43 pm

 
leo_cakep
just joined
Posts: 20
Joined: Sun Apr 02, 2006 7:24 am
Location: Jakarta, Indonesia

Re: CPE-Antenna alignment via customer / Application available?

Tue Mar 10, 2009 3:12 am

may i have the software too...

leo_cakep@yahoo.com
 
chadyagh
just joined
Posts: 10
Joined: Fri Apr 03, 2009 8:11 pm

Re: CPE-Antenna alignment via customer / Application available?

Mon Apr 06, 2009 1:55 am

may i have the software?
chadyagh@hotmail.com
thanks in advance
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24337
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: CPE-Antenna alignment via customer / Application available?

Mon Apr 06, 2009 9:47 am

can the OP please share a link to this famous app, because all these people's email addresses will be gathered by spambots :)
No answer to your question? How to write posts
 
User avatar
jordantrx
Long time Member
Long time Member
Posts: 505
Joined: Tue Oct 23, 2007 8:58 pm
Location: WAY upstate NY

Re: CPE-Antenna alignment via customer / Application available?

Tue Apr 07, 2009 4:46 pm

Yes please :-)
can the OP please share a link to this famous app, because all these people's email addresses will be gathered by spambots :)
~Agricultural WISP "ZONE"~ Beware of oncoming cattle and dont hit the farmer!!! I need to ask him about using his silo for an AP first"~

*Automated Billing Installer* http://wiki.mikrotik.com/wiki/AutomatedBilling Built by Krige ;-)
 
xezen
Long time Member
Long time Member
Posts: 628
Joined: Fri May 30, 2008 10:23 am
Location: South Africa

Re: CPE-Antenna alignment via customer / Application available?

Thu Apr 09, 2009 9:32 am

http://www.witelcom.com/index.php/support/helpntools


RAT

New RAT1.6 : Radio Alignment Tool
If i dont No Ask someone That Does!
 
chadyagh
just joined
Posts: 10
Joined: Fri Apr 03, 2009 8:11 pm

Re: CPE-Antenna alignment via customer / Application available?

Tue May 05, 2009 12:16 am

hi chris, can i have the application pls
chadyagh@hotmail.com
 
couresportivo
newbie
Posts: 42
Joined: Thu Mar 26, 2009 11:30 am

Re: CPE-Antenna alignment via customer / Application available?

Thu Jul 23, 2009 7:21 pm

Christian

Do you think I could have a copy of this app
m259wf AT YAHOO DOT COM

MFG
 
xezen
Long time Member
Long time Member
Posts: 628
Joined: Fri May 30, 2008 10:23 am
Location: South Africa

Re: CPE-Antenna alignment via customer / Application available?

Thu Jul 23, 2009 10:34 pm

can the mikrotik team maybe lock this subject
If i dont No Ask someone That Does!

Who is online

Users browsing this forum: Google [Bot] and 27 guests