Community discussions

MUM Europe 2020
Forum Guru
Forum Guru
Topic Author
Posts: 3804
Joined: Fri May 28, 2004 5:22 pm

positive signal levels

Fri Jun 02, 2006 11:25 pm

Why does the 'scan' sometimes show positive signal levels?


Is this correct or just a display problem?

Member Candidate
Member Candidate
Posts: 272
Joined: Mon Mar 07, 2005 6:16 pm
Location: Oklahoma USA

Sat Jun 03, 2006 12:46 am

I would say its postively a good signal.
User avatar
Posts: 469
Joined: Sat Nov 06, 2004 7:54 pm
Location: Serbia

Sat Jun 03, 2006 1:56 am

I would say its postively a good signal.
I saw that also and it's not good signal. Good signals are minus (-) something not possitive.
This could be just that winbox went crazy :D
I drink like a pirate and smoke like a hippie...
User avatar
Posts: 27
Joined: Tue Feb 21, 2006 1:02 pm

Mon Jun 05, 2006 11:53 am

As I said earlier:

The positive 100's appear due to the binaric nature of a byte.

Usually, 8-bit sequence declared as type:byte allows numbers from 0 to 255. 8-bit type:small_integer stands for -127..127 and the very first bit of the byte is a sign-bit. If you decrease the negative number by 1 consequently, after -127 you will be getting bit inversion in the very first bit and the resulting number will be in positive 100's. So, it is the bug in the RouterOS, when signal gets too weak, it jumps to positive value.
User avatar
Long time Member
Long time Member
Posts: 600
Joined: Wed Mar 02, 2005 5:06 am
Location: Maine

Mon Jun 05, 2006 5:49 pm

Probably those positive reports are rssi rather than dbm

Who is online

Users browsing this forum: No registered users and 32 guests