Community discussions

MikroTik App
 
alexk66
just joined
Topic Author
Posts: 2
Joined: Wed Oct 29, 2014 4:45 pm

RX drop from 300Mbps to 6Mbps

Wed Oct 29, 2014 5:24 pm

Hi, I have a WiFi link with 2x MikroTik BaseBox5 RB912UAG-5HPnD-OUT. Distance between AP and Client is 10Km. Wireless type nstreme.
Both routerboards are updated to RouterOS 6.20 and firmware 3.17. Same problem was before updating. Both routerboards are new, I bought them a few days ago.
Problem is that RX drop from 300Mbps to 6Mbps. Sinlan is ~ -50/-50 dBi and CCQ 99/100, signal to noise is 70dB.
Can someone know what is the problem?
signal.PNG
registration.PNG
registration2.PNG
You do not have the required permissions to view the files attached to this post.
 
alexk66
just joined
Topic Author
Posts: 2
Joined: Wed Oct 29, 2014 4:45 pm

Re: RX drop from 300Mbps to 6Mbps

Tue Nov 04, 2014 7:24 pm

Excellent support. October 29 I asked for help and no answer yet.
 
eochoa77
just joined
Posts: 3
Joined: Sat Sep 13, 2014 10:06 am

Re: RX drop from 300Mbps to 6Mbps

Wed Nov 19, 2014 8:38 am

I currently have about 5 APs on Nstreme and 20 or so on NV2. On Nstreme if there is no traffic passing I have noticed that the RX drops to 6Mbps. That said, I have not had any complaints from any customers. I hope this helps.
 
sparrow
Frequent Visitor
Frequent Visitor
Posts: 53
Joined: Wed Jul 11, 2012 10:59 am

Re: RX drop from 300Mbps to 6Mbps

Wed Nov 19, 2014 6:46 pm

I currently have about 5 APs on Nstreme and 20 or so on NV2. On Nstreme if there is no traffic passing I have noticed that the RX drops to 6Mbps. That said, I have not had any complaints from any customers. I hope this helps.
It's true! If you will use NV2 you can see always higher data rate, it is an nstreme behavior don't worry they not drop packet!
MTCNA - MTCRE - MTCWE
 
david6feo
just joined
Posts: 4
Joined: Sun Dec 07, 2014 7:36 pm

Re: RX drop from 300Mbps to 6Mbps

Sun Jan 04, 2015 8:21 pm

I have the same problem with RB911G 5HPnD links.

I'm using Nstream. Both links are about 500m.

I'll try the latest firmware 6.24

David.
 
david6feo
just joined
Posts: 4
Joined: Sun Dec 07, 2014 7:36 pm

Re: RX drop from 300Mbps to 6Mbps

Mon Jan 05, 2015 9:41 am

I have upgraded to version 6.24.

I've also changed from Nstream to 802.11 and most of the problems have gone away.

regards,

David.
 
boardman
Member Candidate
Member Candidate
Posts: 261
Joined: Fri May 28, 2004 11:10 pm
Location: Mexico
Contact:

Re: RX drop from 300Mbps to 6Mbps

Wed Jun 22, 2016 5:24 pm

Hello,

Did anybody ever found the cause / solution to this? We are experiencing the same behavior with two NetMetal 5 links, 

Best

Who is online

Users browsing this forum: brixsat and 47 guests