with ZTE MF 823 LTE USB stick
with a few manual tweaks I managed to get my lte usb stick running
(using the dhcp client for the lte device, removing the sim pin or
feeding the sim pin via the usb stick web interface (sic!)).
All the ip stuff works pretty well from there on.
But there seems to be no way to retrieve any information from the lte device,
that would be normally collected via the usb serial connection (see picture below). Here's the corresponding console output:
Code: Select all
[admin@VPN-Router] > /system resource usb print # DEVICE VENDOR NAME SPEED 0 2:1 Linux 3.3.5 ohci_hcd RB400 OHCI 12 Mbps 1 1:1 Linux 3.3.5 ehci_hcd RB400 EHCI 480 Mbps 2 1:3 ZTE,Incorporated ZTE Technologies MSM 480 Mbps [admin@VPN-Router] > /port print Flags: I - inactive # DEVICE NAME CHANNELS USED-BY BAUD-RATE 0 I usb1 0 9600