Community discussions

MikroTik App
 
sandrey80
just joined
Topic Author
Posts: 1
Joined: Fri May 29, 2015 10:11 pm

30Mbit/sec via WiFi on 951G-2HnD 6.29 (Atheros AR9300)

Fri May 29, 2015 10:26 pm

I have smthing strange on WiFi.
Interface: WiFi N-only, 5 clients.
Internet: 60Mbit/sec
/interface wireless
set [ find default-name=wlan1 ] adaptive-noise-immunity=ap-and-client-mode band=\
    2ghz-onlyn country=russia disabled=no distance=indoors frequency=2417 \
    frequency-mode=regulatory-domain hw-protection-mode=rts-cts l2mtu=2290 mode=\
    ap-bridge mtu=1492 name=WiFi preamble-mode=long ssid=AirNew tx-power=12 \
    tx-power-mode=all-rates-fixed wireless-protocol=802.11 wmm-support=enabled
/interface wireless security-profiles
set [ find default=yes ] authentication-types=wpa2-psk eap-methods="" mode=\
    dynamic-keys wpa-pre-shared-key= wpa2-pre-shared-key
Interface graph looks like a saw when i download large files on WiFi (see attachments) and current speed 145Mbit/sec
When i download same file via eth1 a graph is flat at 60Mbit/sec.
You do not have the required permissions to view the files attached to this post.
 
User avatar
chechito
Forum Guru
Forum Guru
Posts: 3007
Joined: Sun Aug 24, 2014 3:14 am
Location: Bogota Colombia
Contact:

Re: 30Mbit/sec via WiFi on 951G-2HnD 6.29 (Atheros AR9300)

Mon Jun 01, 2015 5:14 pm

normal performance

in 2.4ghz you have to expect mostly the time only 20mhz works because of co-existence mechanisms.

normaly you have a peak performance of 20-40 mbit /second with good signal.

20 mbit on single spatial stream clients with good signal conditions.
40 mbit on dual spatial stream with good signal conditions.

if you want more buy a 5ghz ap to use 40mhz channels and doubling performance, or even 5ghz AC ap to get more boost using 80mhz channels but only if you have that spectrum avaliable
 
User avatar
CyberTod
Long time Member
Long time Member
Posts: 510
Joined: Wed Jan 25, 2012 10:23 am

Re: 30Mbit/sec via WiFi on 951G-2HnD 6.29 (Atheros AR9300)

Mon Jun 01, 2015 9:02 pm

Also these parameters lower throughput :
hw-protection-mode=rts-cts
Not a good idea to set this on the AP side. It asks every time before using the air if it is free. It is useful on stations to diminish effects of hidden-node.
preamble-mode=long
Also this. Not such a big effect, but still lowers data rate.

Who is online

Users browsing this forum: JmJ17 and 84 guests