2 x RB912UAG-2HPnD + R11e-5HacD Access Points - Running then as CAPs through CAPsMANv2
All devices on ROS 6.29.1 and firmware 3.22
5ghz set to 802.11ac with Ce on 5180 Mhz 20Mhz channels
client test device: mainly iphone5 but any device used causes issues.
This happens on ROS 6.27 and 6.29.1
voltage 24 to 24.3v temp 38 to 41
6.27 was net installed
This happens to both ROS versions that I installed.
Initially intermittent but now be reproduced every time we run speedtest.net or transfer files.
We have disabled the 5Ghz interface and everything appears ok on the 2.4 - tested with speedtest.net and all ok.
We switched R11e-5HacD to just .11n and no extension channel but no luck.
We also have connected 1 x RB912UAG-2HPnD + R11e-5HnD AP which has same CAPsMANv2 same SSIDs etc same ROS and FW. THIS WORKS FINE.
Any suggestions as to what the issue is? 2 x faulty R11e-5HacD or still (possibly?
) flaky ac driver issue in ROS?