Community discussions

MUM Europe 2020
 
cmanciu
newbie
Topic Author
Posts: 36
Joined: Sat Aug 23, 2014 4:18 pm

100 megs connection... what board is needed

Wed Jun 17, 2015 6:19 pm

Right now I have 100 megs coming from the provider....I'm using rb433ah....just found out if I want 3 vlans I need a board where I can change the mtu on the ethernets.....which router board should i get.... any suggestions?
 
User avatar
BartoszP
Forum Guru
Forum Guru
Posts: 1720
Joined: Mon Jun 16, 2014 1:13 pm
Location: Poland

Re: 100 megs connection... what board is needed

Wed Jun 17, 2015 6:36 pm

RB951G-2HnD ?
RB2011 ?
Real admins use real keyboards.
 
User avatar
chechito
Forum Guru
Forum Guru
Posts: 1747
Joined: Sun Aug 24, 2014 3:14 am
Location: Bogota Colombia
Contact:

Re: 100 megs connection... what board is needed

Wed Jun 17, 2015 9:26 pm

in some posts many people have complains about rb 2011 or rb 951 performance for 100mbit Internet connections

i think rb850gx2 its better suited for that kind of load
 
cmanciu
newbie
Topic Author
Posts: 36
Joined: Sat Aug 23, 2014 4:18 pm

Re: 100 megs connection... what board is needed

Sat Jun 20, 2015 6:51 pm

that sucks...i already ordered the 951
 
User avatar
CyberTod
Long time Member
Long time Member
Posts: 511
Joined: Wed Jan 25, 2012 10:23 am

Re: 100 megs connection... what board is needed

Sat Jun 20, 2015 6:58 pm

For a typical home setup with fasttrack enabled it is more than enough. I can do 98mbit/s with 20% cpu usage on my home connection. And my wan interface is 100mbit ethernet so it is capping it with no problem.

P.S. This is with a 951Ui
 
vortex
Forum Veteran
Forum Veteran
Posts: 714
Joined: Sat Feb 16, 2013 6:10 pm

Re: 100 megs connection... what board is needed

Sat Jun 20, 2015 7:18 pm

I do 250Mbps at 50% with RB2011 and fasttrack. 220-240Mbps at 100% without fasttrack.
 
soyelpulpo
newbie
Posts: 39
Joined: Mon Nov 10, 2014 1:22 am
Location: Lima - Peru

Sun Jun 21, 2015 11:12 am

Try this get one with gig ports

Sent from my Nexus 4 using Tapatalk
 
User avatar
chechito
Forum Guru
Forum Guru
Posts: 1747
Joined: Sun Aug 24, 2014 3:14 am
Location: Bogota Colombia
Contact:

Re: 100 megs connection... what board is needed

Mon Jun 22, 2015 2:58 am

ok with fast-track will be no problem, but using firewall or queuing the performance will be limited on rb2011or rb951 because of 600mhz single core cpu CPU, the next mikrotik in terms of performance is the rb850gx2
 
cmanciu
newbie
Topic Author
Posts: 36
Joined: Sat Aug 23, 2014 4:18 pm

Re: 100 megs connection... what board is needed

Mon Jun 22, 2015 6:05 pm

Thank u
 
ericnyamu
newbie
Posts: 32
Joined: Sat Jul 25, 2015 9:27 pm

Re: 100 megs connection... what board is needed

Sat Jul 25, 2015 11:37 pm

A routerboard ? Seriously is there an RB that does less than 100mbps in this day and age ?
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24333
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: 100 megs connection... what board is needed

Mon Jul 27, 2015 11:24 am

Any RouterBOARD device is capable for this, RB951 included
No answer to your question? How to write posts

Who is online

Users browsing this forum: No registered users and 36 guests