Page 1 of 1

NV2 Compatible antennas

Posted: Thu Jun 18, 2015 5:20 pm
by azurtem
Hi

I'm trying to connect SXT Lite 5 station bridges with a NetMetal 5 (bridge) that is connected to a RFElements Sector Carrier Class 5-17 antenna

I can't get the SXT and NetMetal 5 to connect via NV2

Is this normal ?
Can all antennas operate with NV2 protocol ?

thanks
yann

Re: NV2 Compatible antennas

Posted: Fri Jun 19, 2015 2:01 pm
by jmontero
The Antenna doesn't affecto to the Transmission Protocol... Your problem must be that if the Link has a lot of interference, with NV2 you will get worst behaviour than with 802.11. Try to change the channel.

Re: NV2 Compatible antennas

Posted: Fri Jun 19, 2015 2:13 pm
by azurtem
thanks jmontero

Re: NV2 Compatible antennas

Posted: Fri Jun 19, 2015 11:43 pm
by n21roadie
The Antenna doesn't affecto to the Transmission Protocol... Your problem must be that if the Link has a lot of interference, with NV2 you will get worst behaviour than with 802.11. Try to change the channel.
NV2 has come a lot way since its introduction and I find now NV2 is much more resilient to interference than 802.11

Re: NV2 Compatible antennas

Posted: Sat Jun 20, 2015 12:47 am
by pukkita
Which wireless mode are you setting on each end?

Re: NV2 Compatible antennas

Posted: Sat Jun 20, 2015 6:42 pm
by azurtem
nv2

Re: NV2 Compatible antennas

Posted: Sat Jun 20, 2015 6:42 pm
by azurtem
The Antenna doesn't affecto to the Transmission Protocol... Your problem must be that if the Link has a lot of interference, with NV2 you will get worst behaviour than with 802.11. Try to change the channel.
NV2 has come a lot way since its introduction and I find now NV2 is much more resilient to interference than 802.11
thanks n21roadie

Re: NV2 Compatible antennas

Posted: Tue Jun 23, 2015 1:08 am
by pukkita
Make sure the netmetal has a recent ROS and firmware versions.

Can you post /interface wireless export for both the netmetal and SXT?