Community discussions

MikroTik App
 
mrmuu
newbie
Topic Author
Posts: 29
Joined: Thu Dec 01, 2011 4:52 pm

Ligowave/Cambium snmpwalk in dude not working

Thu Oct 27, 2016 9:55 am

Hy,

I would like to get out some parameters from the radios with oid codes in the dude. It works fine with ubnt radios, I run the snmpwalk in the dude and i see the codes, but in case of deliberant, ligowave or cambium radios i see nothing. if i run the snmpwalk in my os (ubuntu) i can see the codes, but works not if i put these codes in the dude, the MIB files i have uploaded.

thanks for help
 
mrmuu
newbie
Topic Author
Posts: 29
Joined: Thu Dec 01, 2011 4:52 pm

Re: Ligowave/Cambium snmpwalk in dude not working

Tue Jan 17, 2017 9:34 am

Any idea?
 
User avatar
PaulsMT
MikroTik Support
MikroTik Support
Posts: 283
Joined: Tue Feb 10, 2015 3:21 pm

Re: Ligowave/Cambium snmpwalk in dude not working

Tue Jan 17, 2017 9:59 am

Any idea?
Please write to support@mikrotik.com
MIB file and remote access will be needed.
 
mrmuu
newbie
Topic Author
Posts: 29
Joined: Thu Dec 01, 2011 4:52 pm

Re: Ligowave/Cambium snmpwalk in dude not working

Wed Jan 18, 2017 9:51 am

I have made a virtual mikrotik x86 and installed the last dude on this VM. The snmpwalk is working I see the list about the oid numbers, but if I put the numbers in the "Appearance" menu nothing happens. I will try it later with a Cambium device too.
 
User avatar
PaulsMT
MikroTik Support
MikroTik Support
Posts: 283
Joined: Tue Feb 10, 2015 3:21 pm

Re: Ligowave/Cambium snmpwalk in dude not working

Wed Jan 18, 2017 12:45 pm

I have made a virtual mikrotik x86 and installed the last dude on this VM. The snmpwalk is working I see the list about the oid numbers, but if I put the numbers in the "Appearance" menu nothing happens. I will try it later with a Cambium device too.
Please test 6.37.4, can you repeat the problem ?
 
mrmuu
newbie
Topic Author
Posts: 29
Joined: Thu Dec 01, 2011 4:52 pm

Re: Ligowave/Cambium snmpwalk in dude not working

Thu Mar 02, 2017 10:26 am

no , with the last dude works everything fine! thanks!

Who is online

Users browsing this forum: No registered users and 13 guests