Hi Guys,

i have uploaded siklu mibs as shown in the screen shot but they are not appearing in the dude.

Can anyone tell me what im doing wrong?

Hello ukzerosniper,

How do I add MIBs to the dude

https://wiki.mikrotik.com/wiki/Manual:The_Dude_v6/Files

Note: After file upload it will take some time for mibs/images to become available on client side for use in labels/maps/etc. To get files available right on the spot disable and enable the server.

I tried using the instructions for the Dude, probably the same ones you did, and it did not work. Then I used the ones that slech just pointed you to, and it works just as it is supposed to. The one thing I did that made it easier was I used Filezilla to create the folder and upload the files. If you are not real experienced with the command line interface, it makes it easy. Or if you are like me, feeling lazy, it is easy and quick.

Guys,

Thanks for responding. However, I am clearly going crazy as the SIKLU mibs are still not showing up.

Please see the picture below. It shows the install location of the dude on the server and it shows the places I have stuck the mib files. The mib files all have the name format "SIKLU-MIB.txt".

Can anyone tell me what I'm doing wrong here, it's driving me crazy!

Thanks guys.

With me it was the Ubiquiti MIB's This is how I did it.

This is my current setup.

I'm still not having any luck.

To make sure I'm not totally crazy, I should be able to go to "Mib Nodes > Module > Siklu" in the list to confirm that they are correctly detected by the Dude.

It does not look like you have placed the MIB files in that folder. Where did you put them?

I was an idiot. They are listed in there it's just that the Siklu mib is called "Radio Root Bridge" and not Siklu. So I was missing that.