Hi all,
I tried to upload and install dude server into my routeros in RB2011 , but i get error saying "it is not mips".... my router is 6.45.1 and i have dowloaded the dude server 6.45.1, so how do you install it?

Hi,
Dude not support mips packet

So how do i enable dude package in my routeros?

You don’t. Mipsbe is not supported.

So how do i enable dude package in my routeros?

What Dude2048 is telling you is that The Dude can only be installed on the hardware of the following types,
TILE devices;
ARM devices;
MMIPS devices;
RouterOS x86 installations;
RouterOS CHR environment

Your Router is on the type MIPSBE. The hardware will not allow you to install The Dude. There is nothing you can update to, or downgrade to or change that will allow you to run the Dude. Your hardware is just wrong.

Oh, thanks for the detailed information. I guess i need to change to a compatible router to support this dude.

So how do i enable dude package in my routeros?

You may find useful and more detailed information in MikroTik wiki page if you are interested in The Dude v6 Installation:
https://wiki.mikrotik.com/wiki/Manual:T ... stallation

Hi,
I have setup this solution prior to my RB2011 router for this dude,
1.I gotten a VPS
2. I have establish PPTP tunnels to the CHR for my RB2011 router.
3. I have Run the Dude on the CHR but it ask me for this part on port number

So anyone has any idea on what "port" should i put it to get it working? Many thanks.

The Dude and WinBox must have the same port.

The Dude and WinBox must have the same port.

Yes, i have put 8291 as the port number, but not working as well. So what port number should i put in as?

You need to change the "Server" setting on your Dude client to the IP or name of your CHR with the Dude Server.

You need to change the "Server" setting on your Dude client to the IP or name of your CHR with the Dude Server.

I tried putting ip or name of the CHR but still not working,

Go to users under sytem and check the permission of the full group. Admin should be a member of the full group

Go to users under sytem and check the permission of the full group. Admin should be a member of the full group

It's kinda irrelevant when you can't get a TCP connection, doncha think?
Did you not see the 10061 error?