Community discussions

 
bney
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 53
Joined: Sun Jun 03, 2007 9:56 pm

Need to have the Dude send email when SNMP Oid changes

Fri Aug 14, 2009 7:56 am

We run a rural network with lots of battery systems in real remote locations. We need to have the dude trigger an email to the on-call pager when a specific oid, in this case the input voltage, drops below a specific threshold. I am not seeing an obvious way to do this, but that merely shows that I have not yet been initiated into the mysteries of this layer of Dude knowledge. Help from anyone would be appreciated.
 
User avatar
sergejs
MikroTik Support
MikroTik Support
Posts: 6616
Joined: Thu Mar 31, 2005 3:33 pm
Location: Riga, Latvia
Contact:

Re: Need to have the Dude send email when SNMP Oid changes

Mon Aug 17, 2009 2:34 pm

Yes it is possible.

Create new Probe,
which will be called Voltage,
select Type as SNMP,
put correct OID (which is reporting voltage),
set correct compare method to declare that service is down when value is lower.

Go to the Notification,
create new notification with type e-mail, correct server and correct e-mail

Go to the correct network map and select device, where voltage should be monitored.
Add Voltage service for device monitor,
switch to Notifications and check e-mail notification to use for voltage monitoring.
 
lebowski
Forum Guru
Forum Guru
Posts: 1616
Joined: Wed Aug 27, 2008 5:17 pm

Re: Need to have the Dude send email when SNMP Oid changes

Mon Aug 17, 2009 5:04 pm

yes it is quite simple, Check out the probe thread and search the dude forum for APC or UPS.
 
bney
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 53
Joined: Sun Jun 03, 2007 9:56 pm

Re: Need to have the Dude send email when SNMP Oid changes

Tue Aug 18, 2009 8:43 am

Many thanks from the Dude Newbie.
 
el berto
Member Candidate
Member Candidate
Posts: 197
Joined: Wed Sep 26, 2007 10:53 am

Re: Need to have the Dude send email when SNMP Oid changes

Tue Sep 24, 2013 5:31 pm

Hi, I haven't an internal server, so I would like to use gmail.

1) in server field Dude gives me error if I don't insert numerical IP address (instead of "smtp.gmail.com")
2) where can I insert e-mail access settings (username and password)?

Regards, Michele.
 
PeterSullivan
newbie
Posts: 30
Joined: Wed Jul 31, 2013 3:03 pm
Contact:

Re: Need to have the Dude send email when SNMP Oid changes

Thu Sep 26, 2013 2:17 pm

Yes it is possible.

Create new Probe,
which will be called Voltage,
select Type as SNMP,
put correct OID (which is reporting voltage),
set correct compare method to declare that service is down when value is lower.

Go to the Notification,
create new notification with type e-mail, correct server and correct e-mail

Go to the correct network map and select device, where voltage should be monitored.
Add Voltage service for device monitor,
switch to Notifications and check e-mail notification to use for voltage monitoring.

Thanks sergejs for this simple explanation.

Who is online

Users browsing this forum: No registered users and 10 guests