I am looking to build an information table similar to the SNMP tab for devices. I have tried using the oid_column command but the data comes in an unusable string. If this data where able to be run vertically instead of horizontally you could actually read the information.
What I need would be to add custom columns to the snmp tab. I need to see the if_alias of a port so that I know whats pugged in where.
Here are a couple of things I have tried with limited to no success.
I tried this in tool tip but it is unreadable in this format.
This works but you need to reproduce this for every port manually. This gives me the PORT -- SPEED -- OPER UP/DOWN -- ADMIN UP/DOWN -- PORT ALIAS.
if (string_size(oid("18.104.22.168.22.214.171.124.126.96.36.199")),concatenate (oid("188.8.131.52.184.108.40.206.220.127.116.11")," ",oid("18.104.22.168.22.214.171.124.126.96.36.199")," ",oid("188.8.131.52.184.108.40.206.1.8.1")," ",oid("220.127.116.11.18.104.22.168.1.7.1")," ",oid("22.214.171.124.126.96.36.199.188.8.131.52")),"")
Anybody have any ideas on how to make this information available automatically without having to customize every single device I add or how to create a custom table of information?