Community discussions

 
Cameron
just joined
Topic Author
Posts: 7
Joined: Sun Mar 27, 2005 7:59 pm

Get current firmware version using SNMP?

Sun Dec 30, 2012 11:29 pm

Is it possible to get the current firmware version of a Routerboard using SNMP?
 
User avatar
ohara
Member
Member
Posts: 371
Joined: Mon Jun 13, 2011 11:30 pm
Location: Warsaw

Re: Get current firmware version using SNMP?

Sun Dec 30, 2012 11:40 pm

Try: oid("1.3.6.1.4.1.14988.1.1.4.4.0")
 
ditonet
Forum Veteran
Forum Veteran
Posts: 841
Joined: Mon Oct 19, 2009 12:52 am
Location: Europe/Poland/Konstancin-Jeziorna
Contact:

Re: Get current firmware version using SNMP?

Mon Dec 31, 2012 12:32 am

Try: oid("1.3.6.1.4.1.14988.1.1.4.4.0")
This OID is RouterOS version not firmware (RouterBOOT).
AFAIK,OID for firmware doesn't exist.

Regards,
Grzegorz | MTCNA, MTCRE, MTCSE | konsultacje MikroTik Warszawa
It is a book about a Spanish guy called Manual. You should read it. - Dilbert
 
wifix
just joined
Posts: 12
Joined: Sat May 26, 2007 8:25 pm

Re: Get current firmware version using SNMP?

Mon Dec 08, 2014 2:17 am

Yes, it is possible.
Try using oid("1.3.6.1.4.1.14988.1.1.7.4.0")

For me is ok.
------
Thomas
WiFiX.org
Italian Communication Solutions Provider
 
jarda
Forum Guru
Forum Guru
Posts: 7604
Joined: Mon Oct 22, 2012 4:46 pm

Re: Get current firmware version using SNMP?

Mon Dec 08, 2014 9:17 am

You can get all oids directly from console, just write "print oid" command in the section you are interested in. Or you can snmp walk thru all oids to see if there is anything you can use. No need to ask individually here.
 
SeanR2222
just joined
Posts: 1
Joined: Sun May 06, 2018 7:10 am

Re: Get current firmware version using SNMP?

Sun May 06, 2018 7:15 am

Hi,

Any of the below will give you back the SW version

.1.3.6.1.4.1.14988.1.1.17.1.1.4.1
.1.3.6.1.2.1.47.1.1.1.1.2.65536
.1.3.6.1.4.1.14988.1.1.4.4.0

Who is online

Users browsing this forum: No registered users and 6 guests