can we get read/write access to this thing from routeros?
right now it is not even read-only, since if i update it, it still shows the "default routeros" script.
Hi Mrz,It will not be configurable from RouterOS
look, if you are into some advanced router configuration in some automated way, you will need a useable default configuration that enables your device to recover its state after your customer resets it. and no, TR069 is not this level - i need all the functionalities routeros can provide, scripts, access to all objects, etc. so i have to roll my own scripts, cause i want the routers to talk to me, and not access them remotely - kind of the IoT way.in the future we might show configuration applied by netinstall there, but at the moment it will always show factory default configuration.
Is that really the case? I have used NetInstall to install a customised script and it successfully sets the device. However, if I initiate a user reset (hold the reset button until the USR LED flashes and let go), it will default the device completely and not go back toe the script I set in NetInstall.You can use Netinstall, Branding or Flashfig to change the config that loads upon reset, yes.