The following code when attempt to assign the 5 Ghz A/N mode to 5 Ghz only A mode returns NO ERROR
After that in wireless section we can see that this mode was assigned to adapеer which unsupported it.
And this wlan going to be disabled
This bahavour is fully incorrect and must be return an error.
I use next command to check: /interface wireless set [find name="wlan1"] band="5ghz-a/n" ht-rxchains=0,1 ht-txchains=0,1
Return no error to 5 Ghz A only adapter.
The catch on error also not working. The system didn't executed the on-error section.
The bandwidth also choosen incorrect and assigned it.
But antenna mode worked correct and save previous section
I use the 6.27 firmware with 411UAHR board.