I hate upgrades, as always something goes wrong (ofcourse other things might have been wrong previously, hence the need for upgrade)
This time WOL stopped working in both 6.44.3 & current 6.45.3
It used to work perfectly fine in my old 6.34.x version
I can use Depicus WOL GUI tool (and with setting Send options: Internet my machines wakes up after packet is sent to 192.168.88.255 - but with Sent options: Local Subnet it also does not work, I assume /tool wol also uses local subnet, hence the issue)
So this does NOT work in current MikroTik RouterOS 6.45.3 (c) 1999-2019
/tool wol interface=ether2-master mac=A0:48:1E:B8:8D:58
Any ideas how to fix it?
You need to find to which interface is A0:48:1E:B8:8D:58 attached. One good way is, while the device is awaken, and assuming good access to it, do:
:put [/ip arp get [f where mac-address=A0:48:1E:B8:8D:58] interface]
After ensuring that the device has been recently seen by the router (say after ping to its ip address).