set bridge=BR1 tagged=ether4 [find vlan-ids=10].
However, I need a way to append the value to what is already present. Here's what I've cobbled together so far, but it does not work correctly.
A full example is shown below.
Example:
Code: Select all
# Script Setup
/interface bridge add name=BR1 protocol-mode=none vlan-filtering=no
/interface bridge vlan
add bridge=BR1 untagged=ether2 vlan-ids=10
# How to Append "ether4" to array?
set bridge=BR1 untagged=([get value-name=untagged]",ether4") [find vlan-ids=10]