for example
[admin@wwj] /ip route> pr where static
Flags: X - disabled, A - active, D - dynamic, C - connect, S - static, r - rip, b - bgp, o - ospf, m - mme,
B - blackhole, U - unreachable, P - prohibit
# DST-ADDRESS PREF-SRC GATEWAY DISTANCE
0 ADS 0.0.0.0/0 pppoe-out1-a 1
1 A S 12.193.16.4/32 pppoe-out1-a 5
2 A S 172.13.1.0/24 pppoe-out1-a 1
3 S 172.17.2.200/32 pppoe-out2-wwj 1
4 A S 172.17.2.200/32 pppoe-out1-a 3
5 S 172.17.65.252/32 pppoe-out2-wwj 1
6 A S 172.17.65.252/32 pppoe-out1-a 3
7 X S 172.21.143.143/32 172.3.4.1 1
8 A S ;;; vpn-server
172.21.192.2/32 pppoe-out1-a 1
9 S ;;; vpn-server
172.21.192.2/32 pppoe-out2-wwj 1
if i just want to show the result of beginwith 172.17.* ,how to input the command
[admin@wwj] /ip route> pr where static dst-address=172.17.
Flags: X - disabled, A - active, D - dynamic, C - connect, S - static, r - rip, b - bgp, o - ospf, m - mme,
B - blackhole, U - unreachable, P - prohibit
# DST-ADDRESS PREF-SRC GATEWAY DISTANCE
[admin@wwj] /ip route> pr where static dst-address="172.17."
Flags: X - disabled, A - active, D - dynamic, C - connect, S - static, r - rip, b - bgp, o - ospf, m - mme,
B - blackhole, U - unreachable, P - prohibit
# DST-ADDRESS PREF-SRC GATEWAY DISTANCE
[admin@wwj] /ip route> pr where static dst-address="172.17.*"
Flags: X - disabled, A - active, D - dynamic, C - connect, S - static, r - rip, b - bgp, o - ospf, m - mme,
B - blackhole, U - unreachable, P - prohibit
# DST-ADDRESS PREF-SRC GATEWAY DISTANCE
[admin@wwj] /ip route> pr where static dst-address=172.17.*
Flags: X - disabled, A - active, D - dynamic, C - connect, S - static, r - rip, b - bgp, o - ospf, m - mme,
B - blackhole, U - unreachable, P - prohibit
# DST-ADDRESS PREF-SRC GATEWAY DISTANCE
[admin@wwj] /ip route>