Community discussions

MikroTik App
 
LukasPineapple
just joined
Topic Author
Posts: 1
Joined: Sat Jul 24, 2021 4:48 pm

Netwatch RBM33G

Sat Jul 24, 2021 6:42 pm

Hi guys,

I use the following set ups for some unattended kiosks:
Routerboard: RBM33G
Modems: 2x R11e LTE
Antenna: mANT LTE 5o

I receive internet through a sim card only. It works well but from time to time the internet is gone and it doesn't reconnect itself. I have to drive their 45min just to reboot the router.
This makes absolutely no sense so I try to use the netwatch tool via Winbox to configurate the rebooting.

The problem is that I have absolutely no idea how to do it. This is what I have so far. I found this in the internet.

This one I put into a new netwatch:
Down:
/log info \"Netwatch to host 193.2.1.66 down"
/system script run NetwatchScript

Up:
/log info \"Netwatch to host 193.2.1.66 up\"

This one i put into System - Script - New Script:
/system script
add name=NetwatchScript policy=ftp,reboot,read,write,policy,test,password,sniff,sensitive source="/log info \"LTE NetwatchScript started\"\r\
\n :if ([/ping 193.2.1.66 interval=2 count=60] =0) do={\r\
\n /log info \"RESETTING USB POWER\"\r\
\n /system routerboard usb power-reset duration=2s\r\
\n :if ([/ping 193.2.1.66 interval=2 count=60] =0) do={ \r\
\n /log info \"REBOOTING\"\r\
\n /system reboot\r\
\n } else={ \r\
\n /log info \"LTE working\"\r\
\n }\r\
\n } else={ \r\
\n /log info \"LTE working\" \r\
\n }"

Does this make sense? Are the scripts correct and do I put them in the correct place?
Also see the files attached.

I appreciate any help!

Thanks & best regards,
Lukas
You do not have the required permissions to view the files attached to this post.

Who is online

Users browsing this forum: No registered users and 12 guests