Community discussions

MikroTik App
 
ajmal
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 58
Joined: Mon Jan 31, 2005 8:38 pm
Location: IN

MRTG Grapher

Thu Mar 24, 2005 6:37 am

Hi All

How to configure MRTG grapher for bandwidth Ussage in MT router for indivisual IPs.Is it possible if please give me with an example.

regards
 
edzix
Member
Member
Posts: 335
Joined: Thu Jul 01, 2004 3:01 pm
Location: Latvia

Thu Mar 24, 2005 10:40 am

in MT you just have to enable SNMP service:
http://www.mikrotik.com/docs/ros/2.8/root/snmp

Edgars
 
GJS
Member
Member
Posts: 418
Joined: Sat May 29, 2004 4:07 pm
Location: London

Fri Mar 25, 2005 8:32 pm

...then use "print oid" in the relevant submenu to get the OID of the parameter you want, bytes-in, bytes-outin your case, then paste these OIDs into your MRTG config file. You can only get OIDs for these items:

/interface
/interface pc
/interface wavelan
/interface wireless
/interface wireless registration-table
/queue simple
/queue tree
/system identity
/system resource

Hope that helps.
Guy

wispuk.org
A Forum Community for UK WISPs
 
User avatar
sergejs
MikroTik Support
MikroTik Support
Posts: 6623
Joined: Thu Mar 31, 2005 3:33 pm
Location: Riga, Latvia
Contact:

Sun Apr 03, 2005 12:54 am

than put IP to Simple Quee, which you need to monitor.

than /queue simple print (needed) OID

and put it to mrtg config file :D
Good Luck.

Who is online

Users browsing this forum: No registered users and 20 guests