RB112 Turn LED on / off
Posted: Fri May 08, 2009 12:13 am
Looking for a way to turn any one of the 4 upper green/yellow led's on (steady, not blink) for 5 sec then back off (will be wired to a relay).
I have found how to turn on the led's for RB411+, but nothing noted for a RB112.
And yes, it has to be a RB112 because it's a partially failed board and all it will be doing is sitting there getting pinged and controlling a relay. Also, it must not be either the blue (power) or orange (user) led since they are already used during boot sequence (i.e. I don't want my relay tripped during boot of the 112)
I have found how to turn on the led's for RB411+, but nothing noted for a RB112.
And yes, it has to be a RB112 because it's a partially failed board and all it will be doing is sitting there getting pinged and controlling a relay. Also, it must not be either the blue (power) or orange (user) led since they are already used during boot sequence (i.e. I don't want my relay tripped during boot of the 112)