updating dynamic l2tp client "connect-to" IP address

jrs · Thu Sep 16, 2010 7:05 pm

Hi all.

Does anyone have a ROS 4.5 script that can resolve a DNS name, and then check if the l2tp-client's connect-to address is still upto date?
If it doesnt match, the script must change the connect-to address to the new DNS name.

i am having trouble getting the connect-to address


[admin@gw] /interface l2tp-client> get jsvpn value-name=connect-to 
[admin@gw] /interface l2tp-client> get jsvpn connect-to            
[admin@gw] /interface l2tp-client>

It does not want to return anything, does anyone have the correct way to read that paramater?

Regards,

janisk · Fri Sep 17, 2010 9:47 am

to display what you get with "get" you have to ":put" that.

NAB · Sat Sep 18, 2010 1:42 am

Have a look on the wiki for the NTP address management script I wrote. Should do exactly what you need with only a little tweaking.

jrs · Mon Sep 20, 2010 1:22 pm

Thank you very much guys!

Managed to get it working

Regards

updating dynamic l2tp client "connect-to" IP address

updating dynamic l2tp client "connect-to" IP address

Re: updating dynamic l2tp client "connect-to" IP address

Re: updating dynamic l2tp client "connect-to" IP address

Re: updating dynamic l2tp client "connect-to" IP address

Who is online