Who can help me to make a script?
I don't have the time and don't understand 80% of script language so definitely need help.
This script will definately make it into the wiki since such tool has been requested for by many...
The scipt should performing the following, wireless scan:
During remote login session to a wireless unit we want to scan in the working band of that unit (and thus in its spectrum environment) the usage of other frequencies. This has to happen in 5, 10, 20 and 40Mhz (if possible) bandwidth.
I presume each time the radio has to be set in its band (5, 10 or 20 / 40Mhz) before a scan can run.
Than, after the scan ran for about 30 secs, the results have to be dumped in a file called "scan result 5Ghz-5Mhz", "scan result 5Ghz-10Mhz" etc.
After all scans have done, wireles should be set back to last working condition and associates to AP again.
After all this the results can be downloaded from CPE to operator's workstation for troubleshooting.
THIS FEATURE IS VERY IMPORTANT ON WIRELESS CONNECTION WITH MANY INTERFERENCE ISSUES!!!
A scan in the AP only is only telling a little bit on what is going on.
I'm not getting further then: \ interface wireless scan 0 duration=30
I'll guarantee you'll earn karma with a good result! And become famous within MT forum!