I have an RB5009 with 2 WAN links. Cable modem with a /29 IP Range, first assigned to the modem as a gateway and one assigned to the RB5009 statically, and the second is an FTTH PPPoE link with a routed /29. The PPPoE link gets a static IP and route when it starts and then a /29 is routed to me over that.
I have 2 wireuard VPN links to 2 separate upstream servers, and i am using Route Rules to send all traffic to one VPN server over one WAN link, and all traffic to the other over a second one. Essentially:
2 route Tables (along with the main). each has a static route to 0.0.0.0/0 to the next hop. main has only the primary default route in it, along with links to internal subnets.
then in the routing rules, i have a rule to server 1, the action looks up only in table WAN1. same with server 2 to WAN2.
Now, the weird part: when pinging the primary WAN 1 IP, I am getting upwards of 30-40% packet drops... and in some cases, more:
Code: Select all
9392 packets transmitted, 3482 received, 62.9259% packet loss, time 9391023ms
rtt min/avg/max/mdev = 13.636/22.802/54.533/3.981 ms
Any ideas about what could be going wrong?
Thanks.