Hello ,
I use a mikrotik router and I want to apply this topology
https://www.figma.com/file/fETpc1c0RxSP ... 6THD8Ruq-1
LAN 1 : 172.16.10.0/23 => Ethernet1
and lan 2 10.10.0.0/24 = > ethernet5 (only 3 devices I want to assign them static IPs from this range I didn't create a vlan for this range
All and Wireguard is working fine when I connect the server directly to et5 but I get this error when I connect the eth5 to switch
Detected conflict by ARP response for 172.16.11.91 from xx:xx:xx:xx:xx:xx
and lease all Mac address are all zeros
I have read and find a similar topic and I know that cause of static ip that I input for the server but I don't understand how to recover from this error without create a dhcp pool for 10.10.0.0/24 network and use static IPs
any idea?
Thanks in advance