Hello,
Could you help me with translate IP ROUTE with ROS6 to ROS7
When I use only IP Route in version 7 I have a problem with access to this network.
My configuration on ROS6 where always working, either location it connects to the same address SITE TO SITE 192.168.0.0/24 but problem perform only in ROS7
/ip route
add distance=1 gateway=11.11.11.11
add distance=1 dst-address=192.168.0.0/24 gateway=bridge1
/ip route> print
Flags: X - disabled, A - active, D - dynamic,
C - connect, S - static, r - rip, b - bgp, o - ospf, m - mme,
B - blackhole, U - unreachable, P - prohibit
# DST-ADDRESS PREF-SRC GATEWAY DISTANCE
0 A S 0.0.0.0/0 11.11.11.11 1
1 ADC 80.50.125.44/30 11.11.11.11 WAN 0
2 A S 192.168.0.0/24 bridge1 1
3 ADC 192.168.10.0/24 192.168.10.1 bridge1 0
My configuration on version ROS7:
/ip route
add disabled=no distance=1 dst-address=0.0.0.0/0 gateway=22.22.22.22 \
pref-src=0.0.0.0 routing-table=main scope=30 suppress-hw-offload=no \
target-scope=10
add distance=1 dst-address=192.168.0.0/24 gateway=LAN pref-src="" \
routing-table=main scope=30 suppress-hw-offload=no target-scope=10
Either routers have add IP ROUTE to location 192.168.0.0/24 but problem perform on ROS7, when i enable this Route i have problem with connection IPSEC to this location.