Hello and thanks for replying.
I recently updated my CAPsMAN server along with its CAPs to 6.49.7, marked as 'stable' for the 433's.
It seems to be better, but i think its still doing it sometimes.
Here is the config i have on my CAPsMAN server:
# may/15/2023 19:03:27 by RouterOS 6.49.7
# software id = D2PI-7N3S
#
# model = 433
# serial number = 2939017BE7F8
/caps-man channel
add band=5ghz-a/n control-channel-width=20mhz extension-channel=eC frequency=\
5825 name=channel5 tx-power=25
add band=2ghz-b/g control-channel-width=20mhz extension-channel=disabled \
frequency=2452 name=channel2 tx-power=25
/interface bridge
add name=bridge1 protocol-mode=none
/caps-man security
add authentication-types=wpa-psk,wpa2-psk encryption="" name=securityDOMA \
passphrase=stemidami
/caps-man configuration
add channel=channel5 channel.band=5ghz-a/n channel.control-channel-width=20mhz \
channel.extension-channel=XX channel.frequency=5825 channel.tx-power=27 \
country=no_country_set datapath.client-to-client-forwarding=yes \
datapath.local-forwarding=yes distance=dynamic hw-protection-mode=none \
installation=any mode=ap name=cfg5 rx-chains=0,1 security=securityDOMA \
security.authentication-types=wpa-psk,wpa2-psk security.encryption=aes-ccm \
security.group-encryption=aes-ccm security.passphrase=stemidami ssid=\
vedlejaktajedle5 tx-chains=0,1
add channel=channel2 country=no_country_set \
datapath.client-to-client-forwarding=yes datapath.local-forwarding=yes \
distance=dynamic hw-protection-mode=none installation=any mode=ap name=cfg2 \
security=securityDOMA ssid=tudlenudle2
/caps-man interface
add channel=channel2 channel.band=2ghz-b/g channel.extension-channel=disabled \
channel.tx-power=25 configuration=cfg2 disabled=no l2mtu=1600 mac-address=\
00:0B:6B:2B:99:57 master-interface=none name=cap2.4chodba radio-mac=\
00:0B:6B:2B:99:57 radio-name=000B6B2B9957 security=securityDOMA
add arp=enabled channel=channel2 channel.band=2ghz-b/g/n \
channel.extension-channel=eC channel.tx-power=27 configuration=cfg2 \
disabled=no l2mtu=1600 mac-address=00:0C:42:61:D1:F6 master-interface=none \
mtu=1500 name=cap2.4pracovna radio-mac=00:0C:42:61:D1:F6 radio-name=\
000C4261D1F6
add arp=enabled channel.tx-power=27 configuration=cfg5 disabled=no l2mtu=1600 \
mac-address=00:0C:42:61:D2:2B master-interface=none mtu=1500 name=\
cap5chodba radio-mac=00:0C:42:61:D2:2B radio-name=000C4261D22B
add arp=enabled channel.tx-power=10 configuration=cfg5 disabled=no l2mtu=1600 \
mac-address=00:0C:42:61:D2:1C master-interface=none mtu=1500 name=cap5misa \
radio-mac=00:0C:42:61:D2:1C radio-name=000C4261D21C
add configuration=cfg5 disabled=no l2mtu=1600 mac-address=00:0C:42:61:D2:1F \
master-interface=none name=cap5obyvak radio-mac=00:0C:42:61:D2:1F \
radio-name=000C4261D21F
add arp=enabled channel.tx-power=28 configuration=cfg5 disabled=no l2mtu=1600 \
mac-address=6C:3B:6B:F7:CE:1E master-interface=none mtu=1500 name=\
cap5pracovna radio-mac=6C:3B:6B:F7:CE:1E radio-name=6C3B6BF7CE1E
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
add authentication-types=wpa-psk,wpa2-psk mode=dynamic-keys name=lucka \
supplicant-identity="" wpa-pre-shared-key=luckalucka wpa2-pre-shared-key=\
luckalucka
/interface wireless
# managed by CAPsMAN
# channel: 5825/20-eC/an(10dBm), SSID: vedlejaktajedle5, local forwarding
set [ find default-name=wlan1 ] band=5ghz-a/n channel-width=20/40mhz-XX \
country="czech republic" disabled=no frequency=auto mode=ap-bridge \
radio-name=RB433AP rx-chains=0,1 security-profile=lucka ssid=MikroTiktak \
station-roaming=enabled tx-chains=0,1 wireless-protocol=nstreme
/user group
set full policy="local,telnet,ssh,ftp,reboot,read,write,policy,test,winbox,passw\
ord,web,sniff,sensitive,api,romon,dude,tikapp"
/caps-man manager
set enabled=yes
/caps-man provisioning
add action=create-enabled hw-supported-modes=an master-configuration=cfg5
/interface bridge port
add bridge=bridge1 interface=wlan1
add bridge=bridge1 interface=ether2
add bridge=bridge1 interface=ether3
add bridge=bridge1 interface=all
/ip neighbor discovery-settings
set discover-interface-list=!dynamic
/interface detect-internet
set internet-interface-list=dynamic lan-interface-list=dynamic \
wan-interface-list=dynamic
/interface wireless cap
#
set caps-man-addresses=127.0.0.1 enabled=yes interfaces=wlan1
/ip dhcp-client
add disabled=no interface=bridge1
/system clock
set time-zone-name=Europe/Prague
/system identity
set name=MisaAP
/system leds
add interface=cap5misa leds=user-led type=interface-transmit
Thanks,
Michael