I've know a little about Routers and Networks for years but I feel like this Router has me confused on the setup.
Backstory: I had an OnHub by Google as my router that went to a Ruckus 10-port switch. That Ruckus switch hardwired to 2 WAPs (Ruckus r510's) as well as several wall outlets. All of my WAP's and devices worked great but I wanted to upgrade my Router as OnHub was being retired. I picked up the MikroTik hEX S Gigabit Ethernet Router with SFP Port (RB760iGS).
I swap them out and that is when the "fun" began.
1. The TV in my office using Wifi for streaming needs to re-setup the Wifi Network every time I turn on the TV. This never happened with the OnHub. I even extended the lease to 24 hours.
2. Wifi connections will randomly drop and then come back. Firmware's updated on all of the devices. I will have full bars, just no internet for 30 seconds and then it comes back.
3. When I type in the IP address (which is listed in the DHCP Server) of my Octoprint Raspberry Pi, it can't find it. It worked fine and was accessible with the OnHub.
As mentioned, I extended the leases to 24 hours (would prefer never but can't find that option).
Lastly, while trying to figure it out I Click on IP, then go to DHCP Server, then click on the IP Address for one of the two WAPs and the Status says Conflict. No clue what that means or if that is part of my problem.
I am assuming it's a config issue on my part, anyone have any ideas?